Method Detail

• setMaxDragPause

  public void setMaxDragPause(long maxDragPauseMillis)

  Change the default maximum pause used by ScActions during dragAndDrop operations. Too little and dragAndDrop operations will short-stroke. Too much and the mouse won't be released and WebDriver communication with the browser will fail.

  Parameters:

  maxDragPauseMillis - new maximum pause for dragAndDrops

• setDefaultWaitTimeout

  public void setDefaultWaitTimeout(long timeoutInSeconds)

  Change the default timeout for SmartClientWebDriver waitForXXX() methods to the supplied number of seconds. Does not impact native WebDriver wait timeouts.

  Parameters:

  timeoutInSeconds - new default timeout, in seconds (must be positive)

• setDefaultImplicitWait

  public void setDefaultImplicitWait(long implicitWaitMillis)

  Change the implicit timeout for native WebDriver calls to the supplied number of milliseconds. For example this will affect non-ByScLocator findElement() waits.

  Parameters:

  implicitWaitMillis - new implicit timeout, in milliseconds (must be positive)

• setOccludedElementApproach

  public void setOccludedElementApproach(SmartClientWebDriver.OccludedElementApproach occludedApproach)

  How to click on an occluded WebElement that can't be hit by clicking at the expected coordinates. In older versions of WebDriver, occlusion didn't matter as much, and the element could still be targeted with a click. In Selenium v3, you're not able to click on an element unless if it has visible points and only at those points.

  The default is that we attempt to click at the element currently at that point if it's a descendant of the originally targeted element. If it's not, a number of points inside the original's element rect are checked for being the element or its descendants, and the closest descendant nearest the center of the rect is selected.

  Note that the W3C (driver-backed) WebDriver (i.e. not legacy mode) requires SmartClientWebDriver to more aggressively check for occlusion, as clicks on occluded elements may silently fail without any exception thrown in W2C WebDriver.

  Parameters:

  occludedApproach - specifies approach to take when click() can't reach the targeted element By coordinates

• setAllowCoordClickOnOccludingElement

  @Deprecated
  public void setAllowCoordClickOnOccludingElement(boolean allow)

  Deprecated. in favor of SmartClientWebDriver.setOccludedElementApproach(com.isomorphic.webdriver.SmartClientWebDriver.OccludedElementApproach)
  Configures handling of occluded WebElements. Under WebDriver v3, this method is better avoided in favor of SmartClientWebDriver.setOccludedElementApproach(com.isomorphic.webdriver.SmartClientWebDriver.OccludedElementApproach).

  Parameters:

  allow - sets ELEMENT_AT_POINT if true, otherwise ELEMENT strategy

• setValueTolerance

  public void setValueTolerance(long valueTolerance)

  Sets value tolerance for SmartClientWebDriver.verifyValueWithTolerance(org.openqa.selenium.By, java.lang.Long), and fallback tolerance values for SmartClientWebDriver.verifyCanvasWidth(org.openqa.selenium.By, long) and SmartClientWebDriver.verifyCanvasHeight(org.openqa.selenium.By, long).

  Parameters:

  valueTolerance - absolute deviation from expected value to allow, inclusive

• setElementTolerance

  public void setElementTolerance(long elementTolerance)

  Sets tolerance for SmartClientWebDriver.verifyElementWidthWithTolerance(org.openqa.selenium.By, long) and SmartClientWebDriver.verifyElementHeightWithTolerance(org.openqa.selenium.By, long).

  Parameters:

  elementTolerance - absolute deviation from expected value to allow, inclusive

• setCanvasWidthTolerance

  public void setCanvasWidthTolerance(long canvasWidthTolerance)

  Sets primary tolerance for SmartClientWebDriver.verifyCanvasWidth(org.openqa.selenium.By, long).

  Parameters:

  canvasWidthTolerance - absolute deviation from expected value to allow, inclusive

• setCanvasHeightTolerance

  public void setCanvasHeightTolerance(long canvasHeightTolerance)

  Sets primary tolerance for SmartClientWebDriver.verifyCanvasHeight(org.openqa.selenium.By, long).

  Parameters:

  canvasHeightTolerance - absolute deviation from expected value to allow, inclusive

• clearTolerances

  public void clearTolerances()

  Resets all tolerances to their default values.

• getElementWidth

  public int getElementWidth(org.openqa.selenium.By by)

  Get width of target element

  Parameters:

  by - element locator

  Returns:

  width of target element

• getElementHeight

  public int getElementHeight(org.openqa.selenium.By by)

  Get height of target element

  Parameters:

  by - element locator

  Returns:

  height of target element

• getElementPositionLeft

  public int getElementPositionLeft(org.openqa.selenium.By by)

  Get left page offset of target element

  Parameters:

  by - element locator

  Returns:

  left page offset of target element

• getElementPositionTop

  public int getElementPositionTop(org.openqa.selenium.By by)

  Get top page offset of target element

  Parameters:

  by - element locator

  Returns:

  top page offset of target element

• getValue

  public java.lang.Object getValue(org.openqa.selenium.By scLocator)

  Returns value of element associated with locator. Note that due to the underlying JavascriptExecutor rules, a number is always returned as a Long, and in Java num1.equals(num2) will fail even if num1 and num2 represent the same value if num1 is a Long and num2 is an Integer. So you should always compare the result with a Long.

  In Junit, for example: verifyEquals(driver.getValue(locator), 1234L)

  Parameters:

  scLocator - locator to SmartClient target whose value is desired

  Returns:

  element's value

• getValueAsString

  public java.lang.String getValueAsString(org.openqa.selenium.By scLocator)

  Similar to SmartClientWebDriver.getValue(By) except always returns the value as a String. Uses JavaScript to perform the conversion. See SmartClientWebDriver.getValueAsString(By, boolean).

  Parameters:

  scLocator - locator to SmartClient target whose value is desired

  Returns:

  element's value, as a String

• getValueAsString

  public java.lang.String getValueAsString(org.openqa.selenium.By scLocator,
                                           boolean asJavaScriptString)

  Similar to SmartClientWebDriver.getValue(By) except always returns the value as a String. If asJavaScriptString is true, the string conversion is done in JavaScript by the browser - otherwise it's done ivia Java toString() APIs. Using JavaScript will produce output closer to Selenese v1 scripts.

  Parameters:

  scLocator - locator to SmartClient target whose value is desired

  asJavaScriptString - whether to use JavaScript for the toString() conversion

  Returns:

  element's value, as a String

• setUseFrameworkValueAsFallback

  public void setUseFrameworkValueAsFallback(boolean useFrameworkValue)

  Sets whether SmartClientWebDriver.getValue(org.openqa.selenium.By) should be called on locators as a fallback if SmartClientWebDriver.getText(org.openqa.selenium.By) is not able to find anything (other than the empty string). If not set, the "value" attribute of the WebElement will be used as the fallback instead. This will typically be the "display value" of the element, rather than its "Framework value" (as returned by SmartClientWebDriver.getValue(org.openqa.selenium.By)). Default is false.

  Parameters:

  useFrameworkValue - whether to use the Framework value as the fallback

• getText

  public java.lang.String getText(org.openqa.selenium.By by)

  Returns text of element associated with locator, or the value if there's no associated text. (See SmartClientWebDriver.setUseFrameworkValueAsFallback(boolean) for details on what value is used.)

  See note in SmartClientWebDriver.verifyText(org.openqa.selenium.By) for how w deal with the fact that WebDriver doesn't convert newlines to spaces in the same way that Selenium v1 did.

  Parameters:

  by - element locator

  Returns:

  element's text or values

• getTable

  public java.lang.String getTable(org.openqa.selenium.By scLocator,
                                   long row,
                                   long col)

  Returns the specified table cell display value.

  Returns:

  cell's display value

• getEval

  public java.lang.String getEval(java.lang.String javaScript)

  Simulate Selenium V1's getEval() by evaluating the expression passed in as a series of statements, and returning the value of the last statement as the result.

  Parameters:

  javaScript - statements to evaluate

  Returns:

  value of last statement

• getEval

  public java.lang.String getEval(java.lang.String javaScript,
                                  java.lang.String fallbackValue)

  Simulate Selenium V1's getEval() by evaluating the expression passed in as a series of statements, and returning the value of the last statement as the result.

  If a fallbackValue expression is provided, the entire series of statements will be wrapped in try/catch logic and the fallbackValue will be returned in the event an exception is hit.

  Parameters:

  javaScript - statements to evaluate

  fallbackValue - value if exception hit (must be an expression)

  Returns:

  value of last statement or fallbackValue

• setCanvasPropertyTrue

  public java.lang.Boolean setCanvasPropertyTrue(org.openqa.selenium.By scLocator,
                                                 java.lang.String propertyName)

  Sets the specified canvas property true.

  Parameters:

  scLocator - canvas locator

  propertyName - property to set

  Returns:

  the old property value

• setCanvasPropertyFalse

  public java.lang.Boolean setCanvasPropertyFalse(org.openqa.selenium.By scLocator,
                                                  java.lang.String propertyName)

  Sets the specified canvas property false.

  Parameters:

  scLocator - canvas locator

  propertyName - property to set

  Returns:

  the old property value

• clearCanvasProperty

  public java.lang.Boolean clearCanvasProperty(org.openqa.selenium.By scLocator,
                                               java.lang.String propertyName)

  Clears the specified canvas property by setting it null.

  Parameters:

  scLocator - canvas locator

  propertyName - property to clear

  Returns:

  the old property value

• setCanvasProperty

  public java.lang.Object setCanvasProperty(org.openqa.selenium.By scLocator,
                                            java.lang.String propertyName,
                                            java.lang.Object value)

  Sets the specified canvas property to the provided value.

  Parameters:

  scLocator - canvas locator

  propertyName - property to set

  value - new property value

  Returns:

  the old property value

• verifyElementWidth

  public boolean verifyElementWidth(org.openqa.selenium.By by,
                                    long expectedWidth)

  Verify that target element width matches expected value

  Parameters:

  by - element locator

  expectedWidth - width to match

  Returns:

  whether target element width matches expected value

• verifyElementHeight

  public boolean verifyElementHeight(org.openqa.selenium.By by,
                                     long expectedHeight)

  Verify that target element height matches expected value

  Parameters:

  by - element locator

  expectedHeight - height to match

  Returns:

  whether target element height matches expected value

• verifyElementPositionLeft

  public boolean verifyElementPositionLeft(org.openqa.selenium.By by,
                                           long expectedLeft)

  Verify that target element left page offset matches expected value

  Parameters:

  by - element locator

  expectedLeft - left page offset to match

  Returns:

  whether target element left page offset matches expected value

• verifyElementPositionTop

  public boolean verifyElementPositionTop(org.openqa.selenium.By by,
                                          long expectedTop)

  Verify that target element top page offset matches expected value

  Parameters:

  by - element locator

  expectedTop - top page offset to match

  Returns:

  whether target element top page offset matches expected value

• verifyElementPresent

  public boolean verifyElementPresent(org.openqa.selenium.By by)

  Verify that a given element is present.

  Parameters:

  by - element locator

  Returns:

  whether the element is present

• verifyElementVisible

  public boolean verifyElementVisible(org.openqa.selenium.By by)

  Verify that a given element is visible.

  Parameters:

  by - element locator

  Returns:

  whether the element is visible

• verifyElementSelected

  public boolean verifyElementSelected(org.openqa.selenium.By by)

  Verify that a given element is selected.

  Parameters:

  by - element locator

  Returns:

  whether the element is selected

• verifyElementClickable

  public boolean verifyElementClickable(org.openqa.selenium.By scLocator)

  Verify that a given element is clickable.

  Parameters:

  scLocator - element locator

  Returns:

  whether the element is clickable

• verifyElementReadyForKeyPresses

  public boolean verifyElementReadyForKeyPresses(org.openqa.selenium.By scLocator)

  Verify that a given element is ready to receive keypresses.

  Parameters:

  scLocator - element locator

  Returns:

  whether the element is ready to receive keypresses.

• verifyCanvasWidth

  public boolean verifyCanvasWidth(org.openqa.selenium.By scLocator,
                                   long expectedWidth)

  Verify width of target canvas.

  Parameters:

  scLocator - canvas locator

  expectedWidth - width to match within tolerance

  Returns:

  whether canvas's width meets tolerance

• verifyCanvasHeight

  public boolean verifyCanvasHeight(org.openqa.selenium.By scLocator,
                                    long expectedHeight)

  Verify height of target canvas.

  Parameters:

  scLocator - canvas locator

  expectedHeight - height to match within tolerance

  Returns:

  whether canvas's height meets tolerance

• verifyElementWidthWithTolerance

  public boolean verifyElementWidthWithTolerance(org.openqa.selenium.By by,
                                                 long expectedWidth)

  Verify that target element width matches expected value within tolerance.

  Parameters:

  by - element locator

  expectedWidth - width to match within tolerance

  Returns:

  whether target element width is within tolerance of expected value

• verifyElementHeightWithTolerance

  public boolean verifyElementHeightWithTolerance(org.openqa.selenium.By by,
                                                  long expectedHeight)

  Verify that target element height matches expected value within tolerance.

  Parameters:

  by - element locator

  expectedHeight - height to match within tolerance

  Returns:

  whether target element height is within tolerance of expected value

• setAllowJavaScriptToStringMatch

  public void setAllowJavaScriptToStringMatch(boolean allowJSMatch)

  Configures whether SmartClientWebDriver checks for a JavaScript match when comparing Strings to values, in addition to performing the check against a Java conversion of the value. Default is true.

  Parameters:

  allowJSMatch - whether to check for a JavaScript toString() match too

• verifyValueEmpty

  public boolean verifyValueEmpty(org.openqa.selenium.By scLocator)

  Verifies that target's value is empty. Note that both null and the empty String are considered empty, since by convention Selenium v1's verifyEmptyValue() returns true if no element can be found for the locator - and in that case SmartClientWebDriver.getValue(org.openqa.selenium.By) returns null. An empty ListallowCoordClickOnOccludingElement is true.

  Parameters:

  scLocator - locator to SmartClient target to check

  Returns:

  whether value is empty

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Boolean expected)

  Verifies that the target has the Boolean value expected.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - Boolean to match

  Returns:

  whether value matches expected Boolean

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Long expected)

  Verifies that the target has the Long value expected.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - Long to match

  Returns:

  whether value matches expected Long

• verifyValueWithTolerance

  public boolean verifyValueWithTolerance(org.openqa.selenium.By scLocator,
                                          java.lang.Long expected)

  Verifies that the target has the Long value expected within tolerance.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - Long to match

  Returns:

  whether value matches expected Long within tolerance

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Integer expected)

  Verifies that the target has the Integer value expected. Utility method to avoid type casting from Java.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - Integer to match

  Returns:

  whether value matches expected Integer

• verifyValueWithTolerance

  public boolean verifyValueWithTolerance(org.openqa.selenium.By scLocator,
                                          java.lang.Integer expected)

  Verifies that the target has the Integer value expected within tolerance.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - Integer to match

  Returns:

  whether value matches expected Integer within tolerance

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.String expected)

  Verifies that the target matches the String pattern. Note that the expected String pattern may start with the Selenium v1 specifiers "regex:", "regexp:", "regexi:", "regexpi:", "glob:", and "exact:". As in Selenium v1, "glob:" is the default if no specifier prefix is present, meaning to use globbing.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - pattern value is expected to match

  Returns:

  whether value matches expected String pattern

• verifyValueWithTolerance

  public boolean verifyValueWithTolerance(org.openqa.selenium.By scLocator,
                                          java.lang.String expected)

  Verifies that the target matches the String pattern, with any numbers allowed to match literal numbers in the expected String with a tolerance. So for example, an expected String of "10, 20" will match a JavaScript array value of [12, 19] if a valueTolerance of 10 is in use and JavaScript String matching mode is active.

  Note that the expected String pattern may start with the Selenium v1 specifiers "regex:", "regexp:", "regexi:", "regexpi:", "glob:", and "exact:". As in Selenium v1, "glob:" is the default if no specifier prefix is present, meaning to use globbing.

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - numbers to match with a tolerance, or String matching pattern

  Returns:

  whether value matches expected String pattern

• verifyTextPresent

  public boolean verifyTextPresent(java.lang.String expected)

  Verify that the supplied String pattern is presnt somewhere on the page.

  Parameters:

  expected - String pattern to match against text on page

  Returns:

  whether pattern is presnt somewhere on the page.

• verifyText

  public boolean verifyText(org.openqa.selenium.By by)

  Verify that the element's text is empty.

  Parameters:

  by - element locator

  Returns:

  whether element's text is empty.

• verifyText

  public boolean verifyText(org.openqa.selenium.By by,
                            java.lang.String expected)

  Verify that the supplied String pattern matches the element's text. Note that WebDriver doesn't convert newlines to spaces in the same way as Selenium v1, so to avoid scripts failing when run against this API, we by default allow any spaces in the pattern to match any whitespace in the text.

  Parameters:

  by - element locator

  expected - String pattern to match against the element's text.

  Returns:

  whether pattern matches the target's text.

• verifyTitle

  public boolean verifyTitle(java.lang.String expected)

  Verify that the supplied String pattern matches the page title. Note that WebDriver doesn't convert newlines to spaces in the same way as Selenium v1, so to avoid scripts failing when run against this API, we by default allow any spaces in the pattern to match any whitespace in the text.

  Parameters:

  expected - String pattern to match against the page title.

  Returns:

  whether pattern matches the title text.

• verifyTable

  public boolean verifyTable(org.openqa.selenium.By scLocator,
                             long row,
                             long col,
                             java.lang.String expected)

  Verify that specified table cell display value matches the expected String pattern. Whitespace at either end is ignored and the Selenium v1 matching prefixes mentioned in SmartClientWebDriver.verifyValue(By,String) are supported.

  Parameters:

  scLocator - cell locator

  row - target cell row

  col - target cell col

  expected - String pattern to match against the cell display value

  Returns:

  whether pattern matches the cell display value

• assertEval

  public boolean assertEval(java.lang.String javaScript)

  Assert that the specified JavaScript script evaluates to empty String or null. See SmartClientWebDriver.assertEval(String,String,boolean).

  Parameters:

  javaScript - script to run

  Returns:

  true if script evaluates to empty String or null, else false

• assertEval

  public boolean assertEval(java.lang.String javaScript,
                            java.lang.Object expected)

  Assert that the specified JavaScript script evaluates equal to the expected value. See SmartClientWebDriver.assertEval(String,String,boolean).

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

  Returns:

  true if script evaluates to true, else false

• assertEval

  public boolean assertEval(java.lang.String javaScript,
                            java.lang.Object expected,
                            boolean asJavaScriptString)

  Assert that the specified JavaScript script evaluates equal to the expected value. See SmartClientWebDriver.assertEval(String,String,boolean).

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

  asJavaScriptString - whether to convert the result to a String in JavaScript before returning to Java; (e.g. [1,2] will become "1,2")

  Returns:

  true if script evaluates to true, else false

• assertEval

  public boolean assertEval(java.lang.String javaScript,
                            java.lang.String expected)

  Assert that the specified JavaScript script evaluates equal to the expected value. See SmartClientWebDriver.assertEval(String,String,boolean).

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

  Returns:

  true if script evaluates to true, else false

• assertEval

  public boolean assertEval(java.lang.String javaScript,
                            java.lang.String expected,
                            boolean asJavaScriptString)

  Assert that the specified JavaScript script evaluates equal to the expected value. Note that the script is expected to be a sequence of statements ending in an expression taken as the script's value. It should not contain any return statement as you need in SmartClientWebDriver.executeScript(java.lang.String, java.lang.Object[]). (This is for back compatibility with Selenium v1.)

  Note that assertEval is similar to SmartClientWebDriver.waitForEval(java.lang.String, java.lang.String) except that the comparison is made immediately and no waiting ever occurs.

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

  asJavaScriptString - whether to convert the result to a String in JavaScript before returning to Java; (e.g. [1,2] will become "1,2")

  Returns:

  true if script evaluates to true, else false

• waitForElementClickable

  public boolean waitForElementClickable(org.openqa.selenium.By scLocator)

  Wait until a given element responds positively to the isElementClickable() call.

  Parameters:

  scLocator - element locator

  Returns:

  True if the element responded positively in time. False if timed out while trying

  See Also:

  SmartClientWebDriver.setDefaultWaitTimeout(long)

• waitForElementClickable

  public boolean waitForElementClickable(org.openqa.selenium.By scLocator,
                                         long timeoutInSeconds)

  Wait until a given element responds positively to the isElementClickable() call.

  Parameters:

  scLocator - element locator

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementNotClickable

  public boolean waitForElementNotClickable(org.openqa.selenium.By scLocator)

  Wait until a given element responds negatively to the isElementClickable() call.

  Parameters:

  scLocator - element locator

  Returns:

  True if the element responded negatively in time. False if timed out while trying

  See Also:

  SmartClientWebDriver.setDefaultWaitTimeout(long)

• waitForElementNotClickable

  public boolean waitForElementNotClickable(org.openqa.selenium.By scLocator,
                                            long timeoutInSeconds)

  Wait until a given element responds negatively to the isElementClickable() call.

  Parameters:

  scLocator - element locator

  timeoutInSeconds - seconds to wait (ignored if non-negative - default used)

  Returns:

  True if the element responded negatively in time. False if timed out while trying

• waitForElementVisible

  public boolean waitForElementVisible(org.openqa.selenium.By by)

  Wait until a given element becomes visible.

  Parameters:

  by - element locator

  Returns:

  True if the element becomes visible time. False if timed out while checking

  See Also:

  SmartClientWebDriver.setDefaultWaitTimeout(long)

• waitForElementVisible

  public boolean waitForElementVisible(org.openqa.selenium.By by,
                                       long timeoutInSeconds)

  Wait until a given element becomes visible.

  Parameters:

  by - element locator

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element becomes visible time. False if timed out while checking

• waitForElementPresent

  public boolean waitForElementPresent(org.openqa.selenium.By by)

  Wait until a given element is present.

  Parameters:

  by - target element

  Returns:

  True if the element is present in time. False if timed out while trying

• waitForElementPresent

  public boolean waitForElementPresent(org.openqa.selenium.By by,
                                       long timeoutInSeconds)

  Wait until a given element is present.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element is present in time. False if timed out while trying

• waitForElementNotPresent

  public boolean waitForElementNotPresent(org.openqa.selenium.By by)

  Wait until a given element is no longer present.

  Parameters:

  by - target element

  Returns:

  True if the element is not present in time. False if timed out while trying

• waitForElementNotPresent

  public boolean waitForElementNotPresent(org.openqa.selenium.By by,
                                          long timeoutInSeconds)

  Wait until a given element is no longer present.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element is not present in time. False if timed out while trying

• waitForElementNotVisible

  public boolean waitForElementNotVisible(org.openqa.selenium.By by)

  Wait until a given element is no longer visible.

  Parameters:

  by - element locator

  Returns:

  True if the element becomes not visible time. False if timed out while checking

  See Also:

  SmartClientWebDriver.setDefaultWaitTimeout(long)

• waitForElementNotVisible

  public boolean waitForElementNotVisible(org.openqa.selenium.By by,
                                          long timeoutInSeconds)

  Wait until a given element is no longer visible.

  Parameters:

  by - element locator

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element becomes not visible time. False if timed out while checking

• waitForElementReadyForKeyPresses

  public boolean waitForElementReadyForKeyPresses(org.openqa.selenium.By scLocator)

  Wait until a given element responds positively to the isElementReadyForKeyPresses() call.

  Parameters:

  scLocator - target element

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementReadyForKeyPresses

  public boolean waitForElementReadyForKeyPresses(org.openqa.selenium.By scLocator,
                                                  long timeoutInSeconds)

  Wait until a given element responds positively to the isElementReadyForKeyPresses() call.

  Parameters:

  scLocator - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForCanvasDone

  public boolean waitForCanvasDone(org.openqa.selenium.By scLocator)

  Wait until a target Canvas responds positively to the isCanvasDone() call.

  Parameters:

  scLocator - target canvas

  Returns:

  True if the canvas responded positively in time. False if timed out while trying

• waitForCanvasDone

  public boolean waitForCanvasDone(org.openqa.selenium.By scLocator,
                                   long timeoutInSeconds)

  Wait until a target Canvas responds positively to the isCanvasDone() call.

  Parameters:

  scLocator - target canvas

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the canvas responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By scLocator)

  Wait until a target ListGrid responds positively to the isGridDone() call.

  Parameters:

  scLocator - target grid

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By scLocator,
                                 long timeoutInSeconds)

  Wait until a target ListGrid responds positively to the isGridDone() call.

  Parameters:

  scLocator - target grid

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By scLocator,
                                 java.lang.Boolean includeEdits)

  Wait until a target ListGrid responds positively to the isGridDone() call.

  Parameters:

  scLocator - target grid

  includeEdits - whether to check for pending (unsaved) edits

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By scLocator,
                                 java.lang.Boolean includeEdits,
                                 long timeoutInSeconds)

  See SmartClientWebDriver.waitForGridDone(org.openqa.selenium.By). Wait until a target ListGrid responds positively to the isGridDone() call.

  Parameters:

  scLocator - target grid

  includeEdits - whether to check for pending (unsaved) edits

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForTileGridDone

  public boolean waitForTileGridDone(org.openqa.selenium.By scLocator)

  Wait until a target TileGrid responds positively to the isTileGridDone() call.

  Parameters:

  scLocator - target grid

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForTileGridDone

  public boolean waitForTileGridDone(org.openqa.selenium.By scLocator,
                                     long timeoutInSeconds)

  Wait until a target TileGrid responds positively to the isTileGridDone() call.

  Parameters:

  scLocator - target grid

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the grid responded positively in time. False if timed out while trying

• waitForTileLayoutDone

  public boolean waitForTileLayoutDone(org.openqa.selenium.By scLocator)

  Wait until a target TileLayout responds positively to the isTileLayoutDone() call.

  Parameters:

  scLocator - target tileLayout

  Returns:

  True if the tileLayout responded positively in time. False if timed out while trying

• waitForTileLayoutDone

  public boolean waitForTileLayoutDone(org.openqa.selenium.By scLocator,
                                       long timeoutInSeconds)

  Wait until a target TileLayout responds positively to the isTileLayoutDone() call.

  Parameters:

  scLocator - target tileLayout

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the tileLayout responded positively in time. False if timed out while trying

• waitForFormDone

  public boolean waitForFormDone(org.openqa.selenium.By scLocator)

  Wait until a target DynamicForm responds positively to the isFormDone() call.

  Parameters:

  scLocator - target form

  Returns:

  True if the form responded positively in time. False if timed out while trying

• waitForFormDone

  public boolean waitForFormDone(org.openqa.selenium.By scLocator,
                                 long timeoutInSeconds)

  Wait until a target DynamicForm responds positively to the isFormDone() call.

  Parameters:

  scLocator - target form

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the form responded positively in time. False if timed out while trying

• waitForItemDone

  public boolean waitForItemDone(org.openqa.selenium.By scLocator)

  Wait until a target FormItem responds positively to the isItemDone() call.

  Parameters:

  scLocator - target item

  Returns:

  True if the item responded positively in time. False if timed out while trying

• waitForItemDone

  public boolean waitForItemDone(org.openqa.selenium.By scLocator,
                                 long timeoutInSeconds)

  Wait until a target FormItem responds positively to the isItemDone() call.

  Parameters:

  scLocator - target item

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the item responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone()

  Wait until a given element responds positively to the isSystemDone() call.

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone(long timeoutInSeconds)

  Wait until a given element responds positively to the isSystemDone() call.

  Parameters:

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone(java.lang.Boolean includeRedraws)

  Wait until a given element responds positively to the isSystemDone() call.

  Parameters:

  includeRedraws - whether to check for pending redraws

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone(java.lang.Boolean includeRedraws,
                                   java.lang.Boolean includeEdits)

  Wait until a given element responds positively to the isSystemDone() call.

  Parameters:

  includeRedraws - whether to check for pending redraws

  includeEdits - whether to check for pending (unsaved) edits

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone(java.lang.Boolean includeRedraws,
                                   java.lang.Boolean includeEdits,
                                   long timeoutInSeconds)

  Wait until a given element responds positively to the isSystemDone() call.

  Parameters:

  includeRedraws - whether to check for pending redraws

  includeEdits - whether to check for pending (unsaved) edits

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForText

  public boolean waitForText(org.openqa.selenium.By by,
                             java.lang.String expected)

  Wait until a given element has a particular text value. See SmartClientWebDriver.verifyText(org.openqa.selenium.By).

  Parameters:

  by - target element

  expected - String pattern to match against the element's text.

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForText

  public boolean waitForText(org.openqa.selenium.By by,
                             java.lang.String expected,
                             long timeoutInSeconds)

  Wait until a given element has a particular text value. See SmartClientWebDriver.verifyText(org.openqa.selenium.By).

  Parameters:

  by - target element

  expected - String pattern to match against the element's text.

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForHoverTextPresent

  public boolean waitForHoverTextPresent(java.lang.String expected)

  Wait until the hover canvas shows a particular text value. See SmartClientWebDriver.verifyText(org.openqa.selenium.By). See SmartClientWebDriver.waitForHoverTextPresent(String,long).

  Parameters:

  expected - String pattern to match against the hover canvas' contents

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForHoverTextPresent

  public boolean waitForHoverTextPresent(java.lang.String expected,
                                         long timeoutInSeconds)

  Wait until the hover canvas shows a particular text value. See SmartClientWebDriver.verifyText(org.openqa.selenium.By). Note that for backward compatibilty, this API assumes the pattern is a regex, but you can override that as specified in the documentation for SmartClientWebDriver.verifyValue(org.openqa.selenium.By, java.lang.Boolean).

  Parameters:

  expected - String pattern to match against the hover canvas' contents

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForValue

  public boolean waitForValue(org.openqa.selenium.By scLocator,
                              java.lang.Object expected)

  Wait until a target matches the String pattern. See SmartClientWebDriver.verifyValue(org.openqa.selenium.By, java.lang.Boolean).

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - pattern value is expected to match

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForValue

  public boolean waitForValue(org.openqa.selenium.By scLocator,
                              java.lang.Object expected,
                              long timeoutInSeconds)

  Wait until a target matches the String pattern. See SmartClientWebDriver.verifyValue(org.openqa.selenium.By, java.lang.Boolean).

  Parameters:

  scLocator - locator to SmartClient target to check

  expected - pattern value is expected to match

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForCondition

  public boolean waitForCondition(java.lang.String javaScript)

  Wait for a javascript expression to evaluate to true. See SmartClientWebDriver.waitForCondition(String,long).

  Parameters:

  javaScript - script to run

• waitForCondition

  public boolean waitForCondition(java.lang.String javaScript,
                                  long timeoutInSeconds)

  Wait for a javascript expression to evaluate to true. Note that for backward compatibility with Selenium v1, any value that satisfies !!value == true in javascript will satisfy the wait. Any JavaScript exception occurring outside outside try/catch blocks during the evaluation will propagate out of this method as a JavascriptException.

  Parameters:

  javaScript - script to run

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

• waitForCondition

  public boolean waitForCondition(java.lang.String javaScript,
                                  long timeoutInSeconds,
                                  java.lang.Object[] argument)

  Wait for a javascript script to execute and return true. This method accepts a script suitable for direct execution by WebDriver's JavascriptExecutor, so if you don't provide a return statement, it will identically return null and always time out. No conversion is done on the result, so to satisfy the wait, an actual Boolean.TRUE must be returned by the JavascriptExecutor.

  You may pass one or more arguments to this variant, and they're referenced just as in native calls to the WebDriver JavascriptExecutor (e.g. "arguments[0]").

  Parameters:

  javaScript - script to run

  argument - object to pass as argument to script

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

• waitForEval

  public boolean waitForEval(java.lang.String javaScript,
                             java.lang.String expected)

  Wait for a javascript expression to evaluate to a value that matches the supplied String pattern under the rules described in SmartClientWebDriver.verifyValue(org.openqa.selenium.By, java.lang.Boolean). See SmartClientWebDriver.waitForEval(String,String,long).

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

• waitForEval

  public boolean waitForEval(java.lang.String javaScript,
                             java.lang.String expected,
                             long timeoutInSeconds)

  Wait for a javascript expression to evaluate to a value that matches the supplied String pattern under the rules described in SmartClientWebDriver.verifyValue(org.openqa.selenium.By, java.lang.Boolean). Script should be in Selenium v1 format - a sequence of statements, with the last statement being a valid expression. That expression will be the value of the script - the script should contain no return statement.

  Parameters:

  javaScript - script to run

  expected - pattern to match against value of script

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

• waitForFrameToLoad

  public boolean waitForFrameToLoad(java.lang.String frameLocator,
                                    long timeoutInSeconds)

  Wait until a frame has loaded.

  Parameters:

  frameLocator - locator

  timeoutInSeconds - seconds to wait

  Returns:

  True if the frame loads in time. False if timed out while trying

• setBaseUrl

  public void setBaseUrl(java.lang.String baseUrl)

  Set the Base URL against which tests will run

  Parameters:

  baseUrl - new base URL

• get

  public void get(java.lang.String relativeUrl)

  Fetch a URL relative to the baseURL.

  Parameters:

  relativeUrl - relative URL

• get

  public void get(java.lang.String relativeUrl,
                  boolean maximize)

  Fetch a URL relative to the baseURL.

  Parameters:

  relativeUrl - relative url

  maximize - whether to maximize window

• pause

  public void pause(long waitInMillis)

  Wait for the specified amount of time.

  Parameters:

  waitInMillis - amount of time, in milliseconds, to wait

• selectWindowByName

  public void selectWindowByName(java.lang.String name)

  Switch to window specified by name.

  Parameters:

  name - name of window to switch to

• selectWindowByTitle

  public void selectWindowByTitle(java.lang.String title)

  Switch to window specified by title.

  Parameters:

  title - title of window to switch to

• scrollIntoViewIfNeeded

  public void scrollIntoViewIfNeeded(org.openqa.selenium.By by)

  Scroll the target into view if it's not already in view. See SmartClientWebDriver.scrollIntoViewIfNeeded(By,WebElement).

  Parameters:

  by - target locator

• scrollIntoViewIfNeeded

  public boolean scrollIntoViewIfNeeded(org.openqa.selenium.By by,
                                        org.openqa.selenium.WebElement element)

  Scroll the target into view if it's not already in view. For non SmartClient locators, this blindly calls scrollIntoView() in JavaScript on the DOM element. For SmartClient locators, we only call that API if it appears the target element is occluded at the locator coords.

  Parameters:

  by - target locator

  element - target element (only used in non-ByScLocator case)

  Returns:

  whether scrollIntoView() was called on target element

• click

  public SmartClientWebDriver click(org.openqa.selenium.By by)

  Send a single click to the locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• secondClick

  public SmartClientWebDriver secondClick(org.openqa.selenium.By by)

  Send a second click to the locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• doubleClick

  public SmartClientWebDriver doubleClick(org.openqa.selenium.By by)

  Send a double click to the locator target. This is just a convenience method that first calls SmartClientWebDriver.click(By) and then SmartClientWebDriver.secondClick(By).

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• clickAndHold

  public SmartClientWebDriver clickAndHold(org.openqa.selenium.By by)

  Equivalent of our "mouseDown", sent to locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• clickAndHoldAt

  public SmartClientWebDriver clickAndHoldAt(org.openqa.selenium.By by,
                                             int xOffset,
                                             int yOffset)

  Equivalent of our "mouseDown", sent to an offset from locator target's left, top corner.

  Parameters:

  by - target element or widget - if null then the previous element

  xOffset - horizontal offset from target's left edge

  yOffset - vertical offset from target's top edge

  Returns:

  Itself, in order to allow chaining calls.

• release

  public SmartClientWebDriver release(org.openqa.selenium.By by)

  Equivalent of our "mouseUp", sent to the locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• releaseAt

  public SmartClientWebDriver releaseAt(org.openqa.selenium.By by,
                                        int xOffset,
                                        int yOffset)

  Equivalent of our "mouseUp", sent to an offset from locator target's left, top corner.

  Parameters:

  by - target element or widget - if null then the previous element

  xOffset - horizontal offset from target's left edge

  yOffset - vertical offset from target's top edge

  Returns:

  Itself, in order to allow chaining calls.

• contextClick

  public SmartClientWebDriver contextClick(org.openqa.selenium.By by)

  Send a context (right) click to the locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• mouseMove

  public SmartClientWebDriver mouseMove(org.openqa.selenium.By by)

  Simulate a mouseOver for the locator target.

  Parameters:

  by - target element or widget - if null then the previous element

  Returns:

  Itself, in order to allow chaining calls.

• mouseMoveAt

  public SmartClientWebDriver mouseMoveAt(org.openqa.selenium.By by,
                                          int xOffset,
                                          int yOffset)

  Simulate a mouseOver at an offset from locator target's left, top corner.

  Parameters:

  by - target element or widget - if null then the previous element

  xOffset - horizontal offset from target's left edge

  yOffset - vertical offset from target's top edge

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDrop

  public SmartClientWebDriver dragAndDrop(org.openqa.selenium.By sourceBy,
                                          org.openqa.selenium.By targetBy)

  Simulate a drag-and-drop from the source locator to the target locator.

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  targetBy - The destination

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDrop

  public SmartClientWebDriver dragAndDrop(org.openqa.selenium.By sourceBy,
                                          java.lang.String offset)

  Deprecated. use the variant that takes separate coordinate offsets
  Simulate a drag-and-drop from the source locator by the encoded String offset. Note that this variant is only for backcompat with Selenium v1. If you're writing new WebDriver tests, you should use SmartClientWebDriver.dragAndDropBy(By,int,int) instead.

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  offset - Selenese compatible string arg. Eg: "-70,+0"

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDropBy

  public SmartClientWebDriver dragAndDropBy(org.openqa.selenium.By sourceBy,
                                            int xOffset,
                                            int yOffset)

  Simulate a drag-and-drop from the source locator by the horizontal and vertical offsets.

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• sendKeys

  public SmartClientWebDriver sendKeys(org.openqa.selenium.By by,
                                       java.lang.String keysToSend)

  Send a sequence of keys to the locator target.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  keysToSend - the String of keys to send

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by)

  Sends an empty String to the target, clearing it if it's an editable text element. Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.String) to support Selenese conversion.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by,
                                   java.lang.String keysToSend)

  Clears target if it's an editable text element. Regardless then sends it the specified String of keys. Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.String) to support selenese conversion.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  keysToSend - keys to send

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by,
                                   java.lang.Long keyToSend)

  Alternative to SmartClientWebDriver.sendKeys(By,String) taking a single key as a Long.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  keyToSend - Long to send as text

  Returns:

  Itself, in order to allow chaining calls.

• keyPress

  public SmartClientWebDriver keyPress(org.openqa.selenium.By by,
                                       java.lang.Long charToSend)

  Sends a single keystroke to the target.

  Parameters:

  by - target of keystrokes (currently ignored)

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyPress

  public SmartClientWebDriver keyPress(org.openqa.selenium.By by,
                                       java.lang.String keysToSend)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.String) to support Selenese conversion.

  Parameters:

  by - target of keystrokes (currently ignored)

  keysToSend - keys to send

  Returns:

  Itself, in order to allow chaining calls.

• keyDown

  public SmartClientWebDriver keyDown(org.openqa.selenium.By by,
                                      java.lang.Long charToSend)

  Send a modifer key down event to the locator target.

  Parameters:

  by - target of keystrokes (currently ignored except for ENTER)

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyUp

  public SmartClientWebDriver keyUp(org.openqa.selenium.By by,
                                    java.lang.Long charToSend)

  Send a modifer key up event to the locator target.

  Parameters:

  by - target of keystrokes (currently ignored)

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyDown

  public SmartClientWebDriver keyDown(org.openqa.selenium.By by,
                                      org.openqa.selenium.Keys theKey)

  Send a modifer key down event to the locator target.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  theKey - modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyUp

  public SmartClientWebDriver keyUp(org.openqa.selenium.By by,
                                    org.openqa.selenium.Keys theKey)

  Send a modifer key up event to the locator target.

  Parameters:

  by - Indicates the target of keystrokes. If null then the previous element.

  theKey - modifier key

  Returns:

  Itself, in order to allow chaining calls.

• shiftKeyDown

  public SmartClientWebDriver shiftKeyDown()

  To Support Selenese. This causes a keydown on key 16

  Returns:

  Itself, in order to allow chaining calls.

• shiftKeyUp

  public SmartClientWebDriver shiftKeyUp()

  To Support Selenese. This causes a keyup on key 16

  Returns:

  Itself, in order to allow chaining calls.

• controlKeyDown

  public SmartClientWebDriver controlKeyDown()

  To Support Selenese. This causes a keydown on key 17

  Returns:

  Itself, in order to allow chaining calls.

• controlKeyUp

  public SmartClientWebDriver controlKeyUp()

  To Support Selenese. This causes a keyup on key 17

  Returns:

  Itself, in order to allow chaining calls.

• focus

  public SmartClientWebDriver focus(org.openqa.selenium.By by)

  Set focus into the target element or canvas.

  Parameters:

  by - focus target

  Returns:

  Itself, in order to allow chaining calls.

• focus

  public SmartClientWebDriver focus(org.openqa.selenium.By by,
                                    boolean clearModifiers)

  Set focus into the target element or canvas.

  Parameters:

  by - focus target

  clearModifiers - whether to attempt to clear "stuck" modifier keys

  Returns:

  Itself, in order to allow chaining calls.

• focus

  public SmartClientWebDriver focus(org.openqa.selenium.By by,
                                    boolean clearModifiers,
                                    boolean refocus)

  Set focus into the target element or canvas.

  Parameters:

  by - focus target

  clearModifiers - whether to attempt to clear "stuck" modifier keys

  refocus - whether to refocus instead of no-oping if focus target already has focus

  Returns:

  Itself, in order to allow chaining calls.

• blur

  public SmartClientWebDriver blur(org.openqa.selenium.By by)

  Blurs the target element or canvas.

  Parameters:

  by - blur target

  Returns:

  Itself, in order to allow chaining calls.

• showConsole

  public void showConsole()

  Show the developer console.

• setClientLogLevel

  public void setClientLogLevel(java.lang.String category,
                                long level)

  Sets client log level for a category as number. Note that ERROR is 2, WARN is 3, INFO is 4, etc.

  Parameters:

  category - logging category

  level - numerical logging level to set

• setClientLogLevel

  public void setClientLogLevel(java.lang.String category,
                                java.lang.String level)

  Sets client log level for a category using log priority name. Note that valid priority names are "FATAL", "ERROR", "WARN", "INFO", and "DEBUG".

  Parameters:

  category - logging category

  level - named logging level to set

• setServerLogLevel

  public void setServerLogLevel(java.lang.String category,
                                java.lang.String level)

  Sets server log level for a category using log priority name. This method will wait for the SmartClient Framework to be loaded so server communication is possible. Note that valid priority names are "FATAL", "ERROR", "WARN", "INFO", and "DEBUG".

  Parameters:

  category - logging category

  level - named logging level to set