Method Detail

• setDefaultWaitTimeout

  public void setDefaultWaitTimeout(int timeoutInSeconds)

  Change the default timeout for the methods that wait to the supplied number of seconds.

  Parameters:

  timeoutInSeconds - new default timeout, in seconds (must be positive)

• waitForElementClickable

  public boolean waitForElementClickable(org.openqa.selenium.By by)

  Wait until a given element responds positively to the isElementClickable() call.

  Parameters:

  by - target element

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementClickable

  public boolean waitForElementClickable(org.openqa.selenium.By by,
                                         int timeoutInSeconds)

  Wait until a given element responds positively to the isElementClickable() call.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementReadyForKeyPresses

  public boolean waitForElementReadyForKeyPresses(org.openqa.selenium.By by)

  Wait until a given element responds positively to the isElementReadyForKeyPresses() call.

  Parameters:

  by - target element

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementReadyForKeyPresses

  public boolean waitForElementReadyForKeyPresses(org.openqa.selenium.By by,
                                                  int timeoutInSeconds)

  Wait until a given element responds positively to the isElementReadyForKeyPresses() call.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By by)

  Wait until a given element responds positively to the isGridDone() call.

  Parameters:

  by - target element

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForGridDone

  public boolean waitForGridDone(org.openqa.selenium.By by,
                                 int timeoutInSeconds)

  Wait until a given element responds positively to the isGridDone() call.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone()

  Wait until a given element responds positively to the isSystemDone() call.

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForSystemDone

  public boolean waitForSystemDone(int timeoutInSeconds)

  Wait until a given element responds positively to the isSystemDone() call.

  Parameters:

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForElementPresent

  public boolean waitForElementPresent(org.openqa.selenium.By by)

  Wait until a given element is present.

  Parameters:

  by - target element

  Returns:

  True if the element is present in time. False if timed out while trying

• waitForElementPresent

  public boolean waitForElementPresent(org.openqa.selenium.By by,
                                       int timeoutInSeconds)

  Wait until a given element is present.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element is present in time. False if timed out while trying

• waitForElementNotPresent

  public boolean waitForElementNotPresent(org.openqa.selenium.By by)

  Wait until a given element is no longer present.

  Parameters:

  by - target element

  Returns:

  True if the element is not present in time. False if timed out while trying

• waitForElementNotPresent

  public boolean waitForElementNotPresent(org.openqa.selenium.By by,
                                          int timeoutInSeconds)

  Wait until a given element is no longer present.

  Parameters:

  by - target element

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element is not present in time. False if timed out while trying

• waitForText

  public boolean waitForText(org.openqa.selenium.By by,
                             java.lang.String string)

  Wait until a given element has a particular text value.

  Parameters:

  by - target element

  string - desired text

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForText

  public boolean waitForText(org.openqa.selenium.By by,
                             java.lang.String string,
                             int timeoutInSeconds)

  Wait until a given element has a particular text value.

  Parameters:

  by - target element

  string - desired text

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

  Returns:

  True if the element responded positively in time. False if timed out while trying

• waitForText

  @Deprecated
  public boolean waitForText(java.lang.String string,
                                         org.openqa.selenium.By by)

  Deprecated. Use SmartClientWebDriver.waitForText(org.openqa.selenium.By, java.lang.String) instead, which has a more standard parameter order.

• waitForCondition

  public boolean waitForCondition(java.lang.String javascript)

  Wait for a javascript condition to be true.

  Parameters:

  javascript - script to run

• waitForCondition

  public boolean waitForCondition(java.lang.String javascript,
                                  int timeoutInSeconds)

  Wait for a javascript condition to be true.

  Parameters:

  javascript - script to run

  timeoutInSeconds - seconds to wait (ignored if non-positive - default used)

• waitForFrameToLoad

  public boolean waitForFrameToLoad(java.lang.String frameLocator,
                                    int timeoutInSeconds)

  Wait until a frame has loaded

  Parameters:

  frameLocator - locator

  timeoutInSeconds - seconds to wait

  Returns:

  True if the frame loads in time. False if timed out while trying

• pause

  public void pause(long waitInMillis)

  Wait for the specified amount of time.

  Parameters:

  waitInMillis - amount of time, in milliseconds, to wait

• setBaseUrl

  public void setBaseUrl(java.lang.String baseUrl)

  Set the Base URL against which tests will run

• get

  public void get(java.lang.String relativeUrl)

  Fetch a URL relative to the baseURL.

  Parameters:

  relativeUrl - relative url

• get

  public void get(java.lang.String relativeUrl,
                  boolean maximize)

  Fetch a URL relative to the baseURL.

  Parameters:

  relativeUrl - relative url

  maximize - whether to maximize window

• showConsole

  public void showConsole()

  Show the developer console

• sendKeys

  public SmartClientWebDriver sendKeys(org.openqa.selenium.By by,
                                       java.lang.CharSequence[] keysToSend)

  Send a sequence of keys to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  keysToSend - the sequence(s) of keys to send

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.CharSequence[]) to support selenese conversion Clears existing content

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by,
                                   java.lang.String keysToSend)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.CharSequence[]) to support selenese conversion Clears and replaces existing content

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  keysToSend - keys to send

  Returns:

  Itself, in order to allow chaining calls.

• type

  public SmartClientWebDriver type(org.openqa.selenium.By by,
                                   java.lang.Long keysToSend)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.CharSequence[]) to support selenese conversion Clears and replaces existing content

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  keysToSend - Long to send as text

  Returns:

  Itself, in order to allow chaining calls.

• keyPress

  public SmartClientWebDriver keyPress(org.openqa.selenium.By by,
                                       java.lang.Long charToSend)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.CharSequence[]) to support selenese conversion

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyPress

  public SmartClientWebDriver keyPress(org.openqa.selenium.By by,
                                       java.lang.String keysToSend)

  Similar to SmartClientWebDriver.sendKeys(org.openqa.selenium.By, java.lang.CharSequence[]) to support selenese conversion

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  keysToSend - keys to send

  Returns:

  Itself, in order to allow chaining calls.

• keyDown

  public SmartClientWebDriver keyDown(org.openqa.selenium.By by,
                                      java.lang.Long charToSend)

  Send a modifer key down event to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyUp

  public SmartClientWebDriver keyUp(org.openqa.selenium.By by,
                                    java.lang.Long charToSend)

  Send a modifer key up event to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  charToSend - Javascript key code for a modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyDown

  public SmartClientWebDriver keyDown(org.openqa.selenium.By by,
                                      org.openqa.selenium.Keys theKey)

  Send a modifer key down event to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  theKey - modifier key

  Returns:

  Itself, in order to allow chaining calls.

• keyUp

  public SmartClientWebDriver keyUp(org.openqa.selenium.By by,
                                    org.openqa.selenium.Keys theKey)

  Send a modifer key up event to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  theKey - modifier key

  Returns:

  Itself, in order to allow chaining calls.

• shiftKeyDown

  public SmartClientWebDriver shiftKeyDown()

  To Support Selenese. This causes a keydown on key 16

  Returns:

  Itself, in order to allow chaining calls.

• shiftKeyUp

  public SmartClientWebDriver shiftKeyUp()

  To Support Selenese. This causes a keyup on key 16

  Returns:

  Itself, in order to allow chaining calls.

• controlKeyDown

  public SmartClientWebDriver controlKeyDown()

  To Support Selenese. This causes a keydown on key 17

  Returns:

  Itself, in order to allow chaining calls.

• controlKeyUp

  public SmartClientWebDriver controlKeyUp()

  To Support Selenese. This causes a keyup on key 17

  Returns:

  Itself, in order to allow chaining calls.

• click

  public SmartClientWebDriver click(org.openqa.selenium.By by)

  Send a single click to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• secondClick

  public SmartClientWebDriver secondClick(org.openqa.selenium.By by)

  Send a second click to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• doubleClick

  public SmartClientWebDriver doubleClick(org.openqa.selenium.By by)

  Send a double click to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• clickAndHold

  public SmartClientWebDriver clickAndHold(org.openqa.selenium.By by)

  Equivalent of our "mouseDown", sent to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• release

  public SmartClientWebDriver release(org.openqa.selenium.By by)

  Equivalent of our "mouseUp", sent to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• contextClick

  public SmartClientWebDriver contextClick(org.openqa.selenium.By by)

  Send a context (right) click to the element specified by the scLocator by

  Parameters:

  by - Indicates the element concerned. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• mouseMove

  public SmartClientWebDriver mouseMove(org.openqa.selenium.By by)

  Simulate a mouseOver for the element specified by the scLocator by

  Parameters:

  by - Indicates the element to move to

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDrop

  public SmartClientWebDriver dragAndDrop(org.openqa.selenium.By sourceBy,
                                          org.openqa.selenium.By targetBy)

  Simulate a drag-and-drop from the source scLocator to the target scLocator

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  targetBy - The destination

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDrop

  public SmartClientWebDriver dragAndDrop(org.openqa.selenium.By sourceBy,
                                          java.lang.String offset)

  Simulate a drag-and-drop from the source scLocator to the offset coordinates

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  offset - Selenese compatible string arg. Eg: "-70/+0"

  Returns:

  Itself, in order to allow chaining calls.

• dragAndDropBy

  public SmartClientWebDriver dragAndDropBy(org.openqa.selenium.By sourceBy,
                                            int xOffset,
                                            int yOffset)

  Simulate a drag-and-drop from the source scLocator to the offset coordinates

  Parameters:

  sourceBy - Indicates the element to drag. If null then the previous element.

  Returns:

  Itself, in order to allow chaining calls.

• getValue

  public java.lang.Object getValue(org.openqa.selenium.By scLocator)

  Returns value of element associated with locator. Note that due to the underlying JavascriptExecutor rules, a number is always returned as a Long, and in Java num1.equals(num2) will fail even if num1 and num2 represent the same value if num1 is a Long and num2 is an Integer. So you should always compare the result with a Long.

  In Junit, for example: verifyEquals(driver.getValue(locator), 1234L)

  Returns:

  element's value

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Boolean expected)

  Assert condition. Utility method to simplify conversion from selenese.

  Returns:

  true if the condition is matched, else false

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Long expected)

  Assert condition. Utility method to simplify conversion from selenese.

  Returns:

  true if the condition is matched, else false

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.Integer expected)

  Assert condition. Utility method to simplify conversion from selenese.

  Returns:

  true if the condition is matched, else false

• verifyValue

  public boolean verifyValue(org.openqa.selenium.By scLocator,
                             java.lang.String expected)

  Assert condition. Utility method to simplify conversion from selenese.

  Returns:

  true if the condition is matched, else false

• assertEval

  public boolean assertEval(java.lang.String javaScript,
                            java.lang.Boolean expected)

  Assert condition. Utility method to simplify conversion from selenese.

  Returns:

  true if the condition is matched, else false

• getText

  public java.lang.String getText(org.openqa.selenium.By scLocator)

  Returns text of element associated with locator, or the value if there's no associated text. (See SmartClientWebDriver.setUseFrameworkValueAsFallback(boolean) for details on what value is used.)

  Returns:

  element's text or value

• verifyText

  public boolean verifyText(org.openqa.selenium.By scLocator,
                            java.lang.String expected)

  Assert condition. Utility method to simplify conversion from selenese. Whitespace at either end is ignored and as in Selenium RC, globbing (* and ? characters) is supported.

  Returns:

  true if the string is matched, else false

• getTable

  public java.lang.String getTable(org.openqa.selenium.By scLocator,
                                   long row,
                                   long col)

  Returns the specified table cell display value. (See SmartClientWebDriver.setUseFrameworkValueAsFallback(boolean) for details on what value is used.)

  Returns:

  cell's display value

• verifyTable

  public boolean verifyTable(org.openqa.selenium.By scLocator,
                             long row,
                             long col,
                             java.lang.String expected)

  Verify that specified table cell display value matches the pattern. Whitespace at either end is ignored and as in Selenium RC, globbing (* and ? characters) is supported.

  Returns:

  true if the table cell display value is matched, else false

• setUseFrameworkValueAsFallback

  public void setUseFrameworkValueAsFallback(boolean useFrameworkValue)

  Sets whether SmartClientWebDriver.getValue(org.openqa.selenium.By) should be called on locators as a fallback if SmartClientWebDriver.getText(org.openqa.selenium.By) is not able to find anything (other than the empty string). If not set, the "value" attribute of the WebElement will be used as the fallback instead. This will typically be the "display value" of the element, rather than its "Framework value" (as returned by SmartClientWebDriver.getValue(org.openqa.selenium.By)). Default is true.

  Parameters:

  useFrameworkValue - whether to use the Framework value as the fallback