DrawItem (Smart GWT LGPL Edition API 5.0p (2021-05-26))

java.lang.Object
- com.smartgwt.client.core.BaseClass
- - com.smartgwt.client.widgets.drawing.DrawItem

All Implemented Interfaces:

HasHandlers, HasClickHandlers, HasDragMoveHandlers, HasDragResizeMoveHandlers, HasDragResizeStartHandlers, HasDragResizeStopHandlers, HasDragStartHandlers, HasDragStopHandlers, HasMouseDownHandlers, HasMouseMoveHandlers, HasMouseOutHandlers, HasMouseOverHandlers, HasMouseUpHandlers, HasMovedHandlers, HasResizedHandlers, HasShowContextMenuHandlers

Direct Known Subclasses:

DrawCurve, DrawDiamond, DrawGroup, DrawImage, DrawLabel, DrawLine, DrawLinePath, DrawOval, DrawPath, DrawRect, DrawSector, DrawShape
```
public class DrawItem
extends BaseClass
implements HasClickHandlers, HasMouseDownHandlers, HasMouseMoveHandlers, HasMouseOutHandlers, HasMouseOverHandlers, HasMouseUpHandlers, HasMovedHandlers, HasDragMoveHandlers, HasDragResizeMoveHandlers, HasDragResizeStartHandlers, HasDragResizeStopHandlers, HasDragStartHandlers, HasDragStopHandlers, HasResizedHandlers, HasShowContextMenuHandlers
```
Base class for graphical elements drawn in a DrawPane. All properties and methods documented here are available on all DrawItems unless otherwise specified.
Note that DrawItems as such should never be created, only concrete subclasses such as DrawGroup and DrawLine.
See DrawPane for the different approaches to create DrawItems.

Field Summary
- Fields inherited from class com.smartgwt.client.core.BaseClass
  config, factoryCreated, factoryProperties, id, scClassName

Constructor Summary

Constructors
Constructor and Description

DrawItem()

DrawItem(JavaScriptObject jsObj)

Constructors
Constructor and Description
`DrawItem()`
`DrawItem(JavaScriptObject jsObj)`

Method Summary

Methods
Modifier and Type	Method and Description
`HandlerRegistration`	`addClickHandler(ClickHandler handler)` Add a click handler.
`HandlerRegistration`	`addDragMoveHandler(DragMoveHandler handler)` Add a dragMove handler.
`HandlerRegistration`	`addDragResizeMoveHandler(DragResizeMoveHandler handler)` Add a dragResizeMove handler.
`HandlerRegistration`	`addDragResizeStartHandler(DragResizeStartHandler handler)` Add a dragResizeStart handler.
`HandlerRegistration`	`addDragResizeStopHandler(DragResizeStopHandler handler)` Add a dragResizeStop handler.
`HandlerRegistration`	`addDragStartHandler(DragStartHandler handler)` Add a dragStart handler.
`HandlerRegistration`	`addDragStopHandler(DragStopHandler handler)` Add a dragStop handler.
`HandlerRegistration`	`addMouseDownHandler(MouseDownHandler handler)` Add a mouseDown handler.
`HandlerRegistration`	`addMouseMoveHandler(MouseMoveHandler handler)` Add a mouseMove handler.
`HandlerRegistration`	`addMouseOutHandler(MouseOutHandler handler)` Add a mouseOut handler.
`HandlerRegistration`	`addMouseOverHandler(MouseOverHandler handler)` Add a mouseOver handler.
`HandlerRegistration`	`addMouseUpHandler(MouseUpHandler handler)` Add a mouseUp handler.
`HandlerRegistration`	`addMovedHandler(MovedHandler handler)` Add a moved handler.
`HandlerRegistration`	`addResizedHandler(ResizedHandler handler)` Add a resized handler.
`HandlerRegistration`	`addShowContextMenuHandler(ShowContextMenuHandler handler)` Add a showContextMenu handler.
`static void`	`changeAutoChildDefaults(java.lang.String autoChildName, Canvas defaults)` Changes the defaults for Canvas AutoChildren named `autoChildName`.
`static void`	`changeAutoChildDefaults(java.lang.String autoChildName, DrawItem defaults)` Changes the defaults for DrawItem AutoChildren named `autoChildName`.
`static void`	`changeAutoChildDefaults(java.lang.String autoChildName, FormItem defaults)` Changes the defaults for FormItem AutoChildren named `autoChildName`.
`static float`	`computeAngle(double px1, double py1, double px2, double py2)` Deprecated. `GwtFloatVsDouble`
`static double`	`computeAngleAsDouble(double px1, double py1, double px2, double py2)` Computes the angle in degrees from the positive X axis to the difference vector v₂ - v₁ between the two given vectors.
`JavaScriptObject`	`create()`
`void`	`dragResizeMove(java.lang.String position, java.lang.Integer x, java.lang.Integer y, java.lang.Integer dX, java.lang.Integer dY)` If `canDrag` is true and the `control knobs` include "resize" knobs, then this notification method will be fired when the user drag-resizes the draw item.
`void`	`draw()` Draw this item into its current `DrawPane`.
`void`	`erase()` Erase this drawItem's visual representation and remove it from its DrawGroup (if any) and DrawPane.
`protected int[]`	`getAttributeAsIntArray(java.lang.String property)`
`int[]`	`getBoundingBox()` Returns the startPoint endPoint
`java.lang.Double[]`	`getBoundingBoxAsDouble()` Returns the startPoint endPoint
`java.lang.Boolean`	`getCanDrag()` Is this DrawItem draggable? If true, then the DrawItem can be drag-repositioned by the user.
`java.lang.Boolean`	`getCanHover()` Will this DrawItem fire hover events when the user hovers over it?
`Canvas`	`getCanvasAutoChild(java.lang.String autoChildName)` Returns the `Canvas` AutoChild named `autoChildName` if already created.
`Point`	`getCenter()` Returns the center point of the `bounding box`.
`Menu`	`getContextMenu()` Context menu to show for this object, an instance of the Menu widget.
`DrawKnob`	`getCornerResizeKnob()` Note : This API is non-functional (always returns null) and exists only to make you aware that this MultiAutoChild exists.
`Cursor`	`getCursor()` If set, specifies the cursor to display when the mouse pointer is over this DrawItem.
`java.lang.Boolean`	`getDestroyed()` Flag indicating a drawItem has been destroyed, similar to `destroyed`.
`java.lang.Boolean`	`getDestroying()` Flag indicating a drawItem is mid-destruction, similar to `destroying`.
`int`	`getDragStartDistance()` Number of pixels the cursor needs to move before the EventHandler starts a drag operation.
`DrawGroup`	`getDrawGroup()` `DrawGroup` this drawItem is a member of.
`DrawItem`	`getDrawItemAutoChild(java.lang.String autoChildName)` Returns the `DrawItem` AutoChild named `autoChildName` if already created.
`DrawPane`	`getDrawPane()` `DrawPane` this drawItem should draw in.
`java.lang.String`	`getEditProxyConstructor()` Default class used to construct the `EditProxy` for this component when the component is `first placed into edit mode`.
`ArrowStyle`	`getEndArrow()` Style of arrowhead to draw at the end of the line or path.
`DrawKnob`	`getEndKnob()` If this item is showing `KnobType.ENDPOINT` `control knobs`, this attribute specifies the AutoChild for the `DrawKnob` for end point of current drawItem.
`boolean`	`getEventOpaque()` Should events inside this DrawItem be attributed to it regardless of which pixels are actually set, if no fill is specified? If set for DrawItems that aren't closed, will capture events occurring in the region that would filled if a fill were specified.
`java.lang.String`	`getFillColor()` Fill color to use for shapes.
`Gradient`	`getFillGradient()` Fill gradient to use for shapes.
`java.lang.String`	`getFillGradientAsString()` Fill gradient to use for shapes.
`float`	`getFillOpacity()` Opacity of the fillColor, as a number between 0 (transparent) and 1 (opaque).
`FormItem`	`getFormItemAutoChild(java.lang.String autoChildName)` Returns the `FormItem` AutoChild named `autoChildName` if already created.
`int`	`getHoverDelay()` If `this.canHover` is true, how long should the mouse be kept over this widget before the hover event is fired
`java.lang.String`	`getHoverHTML()` If `showHover` is true, when the user holds the mouse over this DrawItem for long enough to trigger a hover event, a hover canvas is shown by default.
`java.lang.Boolean`	`getKeepInParentRect()` Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the `draw pane` or an arbitrary bounding box (if set to an array of the form `[left, top, left + width, top + height]`).
`KnobType[]`	`getKnobs()` Array of control knobs to display for this item.
`LineCap`	`getLineCap()` Style of drawing the endpoints of a line.
`java.lang.String`	`getLineColor()` Line color
`float`	`getLineOpacity()` Opacity for lines, as a number between 0 (transparent) and 1 (opaque).
`LinePattern`	`getLinePattern()` Pattern for lines, eg "solid" or "dash".
`int`	`getLineWidth()` Pixel width for lines.
`DrawKnob`	`getMoveKnob()` If this item is showing `KnobType.MOVE` `control knobs`, this attribute specifies the AutoChild for the `DrawKnob` that allows a user to move the DrawItem with help of a knob located at `moveKnobPoint`.
`int[]`	`getMoveKnobOffset()` If this item is showing a `"move"` `control knob`, this attribute allows you to specify an offset in pixels from the `moveKnobPoint` for the move knob.
`MoveKnobPoint`	`getMoveKnobPoint()` If this item is showing a `KnobType.MOVE` `control knob`, this attribute specifies where the knob should appear with respect to the draw item.
`static DrawItem`	`getOrCreateRef(JavaScriptObject jsObj)`
`int`	`getPageLeft()` Returns the page-relative left coordinate of the widget on the page, in pixels.
`int`	`getPageTop()` Returns the page-relative top coordinate of the widget on the page, in pixels
`java.lang.String`	`getPrompt()` Default `hover HTML` that is displayed in the global hover canvas if the user hovers over this DrawItem and `showHover` is true.
`java.lang.String[]`	`getProportionalResizeModifiers()` If `proportionalResizing` is set to `ProportionalResizeMode.MODIFIER` or `ProportionalResizeMode.MODIFIER_OFF` then proportional resizing of the DrawItem is activated or deactivated, respectively, whenever at least one key in this set of modifier keys is pressed.
`ProportionalResizeMode`	`getProportionalResizing()` This property specifies the conditions for when proportional resizing is used.
`static DrawItem`	`getRef(JavaScriptObject jsObj)`
`int[]`	`getResizeBoundingBox()` Returns the bounding box of the shape reflected by the `resize outline` shown when dragging the `resize knobs`.
`java.lang.Double[]`	`getResizeBoundingBoxAsDouble()` Returns the bounding box of the shape reflected by the `resize outline` shown when dragging the `resize knobs`.
`ResizeKnobPoint[]`	`getResizeKnobPoints()` If this item is showing `KnobType.RESIZE` `control knobs`, this attribute specifies the points with respect to the draw item where resize knobs should appear.
`DrawRect`	`getResizeOutline()` If this item is showing `KnobType.RESIZE` `control knobs`, this attribute specifies the AutoChild for the `DrawRect` that draws a rectangle frame which connects all resize knobs of current DrawItem.
`boolean`	`getResizeViaLocalTransformOnly()` If this DrawItem is showing `KnobType.RESIZE` `control knobs`, should resizing the shape solely update the local transform (for example, the DrawItem's `scale` or `translation`)?.
`float`	`getRotation()` Deprecated. `GwtFloatVsDouble`
`double`	`getRotationAsDouble()` Rotation in degrees about the `center point`.
`int[]`	`getScale()` Array holds 2 values representing scaling along x and y dimensions.
`Shadow`	`getShadow()` Shadow used for all DrawItem subtypes.
`boolean`	`getShowHover()` If `canHover` is true, should we show the global hover canvas by default when the user hovers over this DrawItem?
`boolean`	`getShowResizeOutline()` If this item is showing `KnobType.RESIZE` `control knobs` will the resize outline be shown or not.
`DrawKnob`	`getSideResizeKnob()` Note : This API is non-functional (always returns null) and exists only to make you aware that this MultiAutoChild exists.
`ArrowStyle`	`getStartArrow()` Style of arrowhead to draw at the beginning of the line or path.
`DrawKnob`	`getStartKnob()` If this item is showing `KnobType.STARTPOINT` `control knobs`, this attribute specifies the AutoChild for the `DrawKnob` for start point of current drawItem.
`void`	`getSvgString()` Generates a string containing the SVG source of this DrawItem.
`int[]`	`getTranslate()` Array holds two values representing translation along the x and y dimensions.
`double`	`getXShearFactor()` The slope of an x-shearing transformation applied to this DrawItem.
`double`	`getYShearFactor()` The slope of a y-shearing transformation applied to this DrawItem.
`void`	`hide()` Hide this drawItem.
`void`	`hideAllKnobs()` Hides all control knobs for this drawItem.
`void`	`hideKnobs(KnobType... knobType)` Hides a set of control knobs for this drawItem.
`void`	`hideKnobs(KnobType knobType)` Hides a set of control knobs for this drawItem.
`boolean`	`hover()` If `canHover` is true for this DrawItem, the hover() string method will be fired when the user hovers over this DrawItem.
`boolean`	`isInBounds(int x, int y)` Returns true if the given point in the drawing coordinate system, when converted to coordinates in this DrawItem's local coordinate system, is within the `bounding box` of this DrawItem's shape.
`boolean`	`isPointInPath(int x, int y)` Returns true if the given point in the drawing coordinate system is within this DrawItem's shape, taking into account local transforms.
`void`	`moveBy(int dX, int dY)` Move the shape by the specified deltas for the left and top coordinate.
`void`	`moveTo(java.lang.Integer left, java.lang.Integer top)` Move the DrawItem to the specified coordinates in the global coordinate system.
`void`	`resizeBy(int dX, int dY)` Resize the shape by the specified deltas.
`void`	`resizeTo(java.lang.Integer width, java.lang.Integer height)` Resize to the specified size
`void`	`rotateBy(double degrees)` Rotate the shape by the relative rotation in degrees
`void`	`rotateTo(double degrees)` Rotate the shape by the absolute rotation in degrees
`void`	`scaleBy(double x, double y)` Scale the shape by the x, y multipliers
`void`	`scaleTo(double x, double y)` Scale the shape by the x, y multipliers
`protected void`	`setAttribute(java.lang.String attribute, float[] value, boolean allowPostCreate)`
`protected void`	`setAttribute(java.lang.String attribute, java.lang.Float[] value, boolean allowPostCreate)`
`void`	`setAutoChildConstructor(java.lang.String autoChildName, java.lang.String className)` Sets the SmartClient constructor for the AutoChild named `autoChildName`.
`void`	`setAutoChildProperties(java.lang.String autoChildName, Canvas properties)` Sets the properties for creating a `Canvas` AutoChild named `autoChildName`.
`void`	`setAutoChildProperties(java.lang.String autoChildName, DrawItem properties)` Sets the properties for creating a `DrawItem` AutoChild named `autoChildName`.
`void`	`setAutoChildProperties(java.lang.String autoChildName, EditProxy properties)` Sets the properties for creating an AutoChild named `autoChildName`.
`void`	`setAutoChildProperties(java.lang.String autoChildName, FormItem properties)` Sets the properties for creating a `FormItem` AutoChild named `autoChildName`.
`void`	`setAutoChildVisibility(java.lang.String autoChildName, boolean visible)` Sets whether to create and show the AutoChild named `autoChildName`.
`void`	`setCanDrag(java.lang.Boolean canDrag)` Is this DrawItem draggable? If true, then the DrawItem can be drag-repositioned by the user.
`void`	`setCanHover(java.lang.Boolean canHover)` Will this DrawItem fire hover events when the user hovers over it?
`void`	`setCenterPoint(int left, int top)` Change the center point for this DrawItem.
`void`	`setContextMenu(Menu contextMenu)` Context menu to show for this object, an instance of the Menu widget.
`void`	`setCursor(Cursor cursor)` If set, specifies the cursor to display when the mouse pointer is over this DrawItem.
`static void`	`setDefaultProperties(DrawItem drawItemProperties)` Class level method to set the default properties of this class.
`void`	`setDragStartDistance(int dragStartDistance)` Number of pixels the cursor needs to move before the EventHandler starts a drag operation.
`void`	`setDrawGroup(DrawGroup drawGroup)` `DrawGroup` this drawItem is a member of.
`void`	`setDrawPane(DrawPane drawPane)` `DrawPane` this drawItem should draw in.
`void`	`setEditProxyConstructor(java.lang.String editProxyConstructor)` Default class used to construct the `EditProxy` for this component when the component is `first placed into edit mode`.
`void`	`setEndArrow(ArrowStyle endArrow)` Style of arrowhead to draw at the end of the line or path.
`void`	`setEventOpaque(boolean eventOpaque)` Should events inside this DrawItem be attributed to it regardless of which pixels are actually set, if no fill is specified? If set for DrawItems that aren't closed, will capture events occurring in the region that would filled if a fill were specified.
`void`	`setFillColor(java.lang.String fillColor)` Fill color to use for shapes.
`void`	`setFillGradient(Gradient fillGradient)` Fill gradient to use for shapes.
`void`	`setFillGradient(java.lang.String fillGradient)` Fill gradient to use for shapes.
`void`	`setFillOpacity(float fillOpacity)` Opacity of the fillColor, as a number between 0 (transparent) and 1 (opaque).
`void`	`setHoverDelay(int hoverDelay)` If `this.canHover` is true, how long should the mouse be kept over this widget before the hover event is fired
`void`	`setKeepInParentRect(java.lang.Boolean keepInParentRect)` Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the `draw pane` or an arbitrary bounding box (if set to an array of the form `[left, top, left + width, top + height]`).
`void`	`setKeepInParentRect(float... keepInParentRect)` Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the `draw pane` or an arbitrary bounding box (if set to an array of the form `[left, top, left + width, top + height]`).
`void`	`setKnobs(KnobType... knobs)` Array of control knobs to display for this item.
`void`	`setLineCap(LineCap lineCap)` Style of drawing the endpoints of a line.
`void`	`setLineColor(java.lang.String lineColor)` Line color If this method is called after the component has been drawn/initialized: Update lineColor for this drawItem.
`void`	`setLineOpacity(float lineOpacity)` Opacity for lines, as a number between 0 (transparent) and 1 (opaque).
`void`	`setLinePattern(LinePattern linePattern)` Pattern for lines, eg "solid" or "dash".
`void`	`setLineWidth(int lineWidth)` Pixel width for lines.
`void`	`setMoveKnobOffset(int[] moveKnobOffset)` If this item is showing a `"move"` `control knob`, this attribute allows you to specify an offset in pixels from the `moveKnobPoint` for the move knob.
`void`	`setMoveKnobPoint(MoveKnobPoint moveKnobPoint)` If this item is showing a `KnobType.MOVE` `control knob`, this attribute specifies where the knob should appear with respect to the draw item.
`void`	`setPrompt(java.lang.String prompt)` Default `hover HTML` that is displayed in the global hover canvas if the user hovers over this DrawItem and `showHover` is true.
`void`	`setPropertyValue(java.lang.String propertyName, java.lang.Object newValue)` Sets a property on this DrawItem, calling the appropriate setter method if one is found and is supported.
`void`	`setProportionalResizeModifiers(java.lang.String... proportionalResizeModifiers)` If `proportionalResizing` is set to `ProportionalResizeMode.MODIFIER` or `ProportionalResizeMode.MODIFIER_OFF` then proportional resizing of the DrawItem is activated or deactivated, respectively, whenever at least one key in this set of modifier keys is pressed.
`void`	`setProportionalResizing(ProportionalResizeMode proportionalResizing)` This property specifies the conditions for when proportional resizing is used.
`void`	`setResizeKnobPoints(ResizeKnobPoint... resizeKnobPoints)` If this item is showing `KnobType.RESIZE` `control knobs`, this attribute specifies the points with respect to the draw item where resize knobs should appear.
`void`	`setResizeViaLocalTransformOnly(boolean resizeViaLocalTransformOnly)` If this DrawItem is showing `KnobType.RESIZE` `control knobs`, should resizing the shape solely update the local transform (for example, the DrawItem's `scale` or `translation`)?.
`void`	`setRotation(double rotation)` Rotation in degrees about the `center point`.
`void`	`setRotation(float rotation)` Deprecated. `GwtFloatVsDouble`
`void`	`setScale(int[] scale)` Array holds 2 values representing scaling along x and y dimensions.
`void`	`setShadow(Shadow shadow)` Shadow used for all DrawItem subtypes.
`void`	`setShowHover(boolean showHover)` If `canHover` is true, should we show the global hover canvas by default when the user hovers over this DrawItem?
`void`	`setShowResizeOutline(boolean showResizeOutline)` If this item is showing `KnobType.RESIZE` `control knobs` will the resize outline be shown or not.
`void`	`setStartArrow(ArrowStyle startArrow)` Style of arrowhead to draw at the beginning of the line or path.
`void`	`setTranslate(int[] translate)` Array holds two values representing translation along the x and y dimensions.
`void`	`setXShearFactor(double xShearFactor)` The slope of an x-shearing transformation applied to this DrawItem.
`void`	`setYShearFactor(double yShearFactor)` The slope of a y-shearing transformation applied to this DrawItem.
`void`	`show()` Make this drawItem visible.
`void`	`showAllKnobs()` Shows all supported control knobs for this drawItem.
`void`	`showKnobs(KnobType... knobType)` Shows a set of control knobs for this drawItem.
`void`	`showKnobs(KnobType knobType)` Shows a set of control knobs for this drawItem.
`boolean`	`supportsEndArrow()` Does this DrawItem support `DrawItem.setEndArrow()`? For example, this is false for `DrawRect` and `DrawOval`, and true for `DrawLine`.
`boolean`	`supportsStartArrow()` Does this DrawItem support `DrawItem.setStartArrow()`? For example, this is false for `DrawRect` and `DrawOval`, and true for `DrawLine`.

Methods inherited from class com.smartgwt.client.core.BaseClass
applyFactoryProperties, asSGWTComponent, createJsObj, destroy, doAddHandler, doInit, error, error, errorIfNotCreated, fireEvent, getAttribute, getAttributeAsBoolean, getAttributeAsDate, getAttributeAsDouble, getAttributeAsElement, getAttributeAsFloat, getAttributeAsInt, getAttributeAsJavaScriptObject, getAttributeAsMap, getAttributeAsString, getAttributeAsStringArray, getClassName, getConfig, getHandlerCount, getID, getJsObj, getOrCreateJsObj, getScClassName, getTestInstance, hasAutoAssignedID, internalSetID, internalSetID, isCreated, isFactoryCreated, onBind, onInit, registerID, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setConfig, setFactoryCreated, setID, setJavaScriptObject, setProperty, setProperty, setProperty, setProperty, setScClassName

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface com.google.gwt.event.shared.HasHandlers
fireEvent

- Constructor Detail
  - DrawItem
```
public DrawItem()
```
  - DrawItem
```
public DrawItem(JavaScriptObject jsObj)
```
- Method Detail
  - getOrCreateRef
```
public static DrawItem getOrCreateRef(JavaScriptObject jsObj)
```
  - changeAutoChildDefaults
```
public static void changeAutoChildDefaults(java.lang.String autoChildName,
                           Canvas defaults)
```
    Changes the defaults for Canvas AutoChildren named autoChildName.
    
    Parameters:
    autoChildName - name of an AutoChild to customize the defaults for.
    defaults - Canvas defaults to apply. These defaults override any existing properties without destroying or wiping out non-overridden properties.
    See Also:
    AutoChildUsage
  - changeAutoChildDefaults
```
public static void changeAutoChildDefaults(java.lang.String autoChildName,
                           FormItem defaults)
```
    Changes the defaults for FormItem AutoChildren named autoChildName.
    
    Parameters:
    autoChildName - name of an AutoChild to customize the defaults for.
    defaults - FormItem defaults to apply. These defaults override any existing properties without destroying or wiping out non-overridden properties.
    See Also:
    AutoChildUsage
  - changeAutoChildDefaults
```
public static void changeAutoChildDefaults(java.lang.String autoChildName,
                           DrawItem defaults)
```
    Changes the defaults for DrawItem AutoChildren named autoChildName.
    
    Parameters:
    autoChildName - name of an AutoChild to customize the defaults for.
    defaults - DrawItem defaults to apply. These defaults override any existing properties without destroying or wiping out non-overridden properties.
    See Also:
    AutoChildUsage
  - create
```
public JavaScriptObject create()
```
    Specified by:
    
    create in class BaseClass
  - setCanDrag
```
public void setCanDrag(java.lang.Boolean canDrag)
```
    Is this DrawItem draggable? If true, then the DrawItem can be drag-repositioned by the user.
    
    If this method is called after the component has been drawn/initialized: Setter for canDrag.
    Note : This is an advanced setting
    
    Parameters:
    canDrag - new value for this.canDrag.. Default value is false
  - getCanDrag
```
public java.lang.Boolean getCanDrag()
```
    Is this DrawItem draggable? If true, then the DrawItem can be drag-repositioned by the user.
    
    Returns:
    Boolean
  - setCanHover
```
public void setCanHover(java.lang.Boolean canHover)
```
    Will this DrawItem fire hover events when the user hovers over it?
    
    Parameters:
    canHover - Default value is null
    See Also:
    setShowHover(boolean)
  - getCanHover
```
public java.lang.Boolean getCanHover()
```
    Will this DrawItem fire hover events when the user hovers over it?
    
    Returns:
    Boolean
    See Also:
    getShowHover()
  - setContextMenu
```
public void setContextMenu(Menu contextMenu)
```
    Context menu to show for this object, an instance of the Menu widget.
    Note: if Canvas.destroy() is called on a canvas, any specified context menu is not automatically destroyed as well. This is in contrast to MenuButtons which automatically destroy their specified menu by default. The behavior is intentional as context menus are commonly reused across components.
    
    Parameters:
    contextMenu - Default value is null
    See Also:
    ShowContextMenuEvent, Cues overview and related methods, Context menus Example
  - getContextMenu
```
public Menu getContextMenu()
```
    Context menu to show for this object, an instance of the Menu widget.
    Note: if Canvas.destroy() is called on a canvas, any specified context menu is not automatically destroyed as well. This is in contrast to MenuButtons which automatically destroy their specified menu by default. The behavior is intentional as context menus are commonly reused across components.
    
    Returns:
    Menu
    See Also:
    ShowContextMenuEvent, Cues overview and related methods, Context menus Example
  - getCornerResizeKnob
```
public DrawKnob getCornerResizeKnob()
```
    Note : This API is non-functional (always returns null) and exists only to make you aware that this MultiAutoChild exists. See Using AutoChildren for details.
    If this item is showing KnobType.RESIZE control knobs, this attribute specifies the MultiAutoChild for the DrawKnob that allows a user to resize the DrawItem with help of knobs located at corners of a bounding rectangle of current DrawItem. Default shape is red circle.
    
    Returns:
    null
  - setCursor
```
public void setCursor(Cursor cursor)
```
    If set, specifies the cursor to display when the mouse pointer is over this DrawItem.
    Note : This is an advanced setting
    
    Parameters:
    cursor - new cursor.. Default value is null
  - getCursor
```
public Cursor getCursor()
```
    If set, specifies the cursor to display when the mouse pointer is over this DrawItem.
    
    Returns:
    Cursor
  - getDestroyed
```
public java.lang.Boolean getDestroyed()
                               throws java.lang.IllegalStateException
```
    Flag indicating a drawItem has been destroyed, similar to destroyed.
    Note : This method should be called only after the underlying component has been created.
    
    Returns:
    Boolean
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - getDestroying
```
public java.lang.Boolean getDestroying()
                                throws java.lang.IllegalStateException
```
    Flag indicating a drawItem is mid-destruction, similar to destroying.
    Note : This method should be called only after the underlying component has been created.
    
    Returns:
    Boolean
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - setDragStartDistance
```
public void setDragStartDistance(int dragStartDistance)
```
    Number of pixels the cursor needs to move before the EventHandler starts a drag operation.
    Note : This is an advanced setting
    
    Parameters:
    dragStartDistance - Default value is 5
    See Also:
    Dragdrop overview and related methods
  - getDragStartDistance
```
public int getDragStartDistance()
```
    Number of pixels the cursor needs to move before the EventHandler starts a drag operation.
    
    Returns:
    int
    See Also:
    Dragdrop overview and related methods
  - setDrawGroup
```
public void setDrawGroup(DrawGroup drawGroup)
                  throws java.lang.IllegalStateException
```
    DrawGroup this drawItem is a member of.
    
    Parameters:
    drawGroup - Default value is null
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getDrawGroup
```
public DrawGroup getDrawGroup()
```
    DrawGroup this drawItem is a member of.
    
    Returns:
    DrawGroup
  - setDrawPane
```
public void setDrawPane(DrawPane drawPane)
```
    DrawPane this drawItem should draw in.
    If this item has a DrawGroup, the drawGroup's drawPane is automatically used.
    
    If this method is called after the component has been drawn/initialized: Setter for drawPane.
    
    Parameters:
    drawPane - new value for this.drawPane.. Default value is null
  - getDrawPane
```
public DrawPane getDrawPane()
```
    DrawPane this drawItem should draw in.
    If this item has a DrawGroup, the drawGroup's drawPane is automatically used.
    
    Returns:
    DrawPane
  - setEditProxyConstructor
```
public void setEditProxyConstructor(java.lang.String editProxyConstructor)
                             throws java.lang.IllegalStateException
```
    Default class used to construct the EditProxy for this component when the component is first placed into edit mode.
    
    Parameters:
    editProxyConstructor - See SCClassName . Default value is "DrawItemEditProxy"
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getEditProxyConstructor
```
public java.lang.String getEditProxyConstructor()
```
    Default class used to construct the EditProxy for this component when the component is first placed into edit mode.
    
    Returns:
    See SCClassName
  - setEndArrow
```
public void setEndArrow(ArrowStyle endArrow)
```
    Style of arrowhead to draw at the end of the line or path.
    
    If this method is called after the component has been drawn/initialized: Set the arrowhead at the end of this path.
    NOTE: Not all DrawItem classes support arrowheads. You can use DrawItem.supportsEndArrow() to dynamically check whether a DrawItem instance supports this method.
    
    Parameters:
    endArrow - style of arrow to use. Default value is null
  - getEndArrow
```
public ArrowStyle getEndArrow()
```
    Style of arrowhead to draw at the end of the line or path.
    
    Returns:
    ArrowStyle
  - getEndKnob
```
public DrawKnob getEndKnob()
                    throws java.lang.IllegalStateException
```
    If this item is showing KnobType.ENDPOINT control knobs, this attribute specifies the AutoChild for the DrawKnob for end point of current drawItem.
    For an overview of how to use and configure AutoChildren, see Using AutoChildren.
    
    Returns:
    DrawKnob
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - setEventOpaque
```
public void setEventOpaque(boolean eventOpaque)
                    throws java.lang.IllegalStateException
```
    Should events inside this DrawItem be attributed to it regardless of which pixels are actually set, if no fill is specified? If set for DrawItems that aren't closed, will capture events occurring in the region that would filled if a fill were specified. This property is true by default for closed shapes, and false for paths, lines, etc.
    Note : This is an advanced setting
    
    Parameters:
    eventOpaque - Default value is varies
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
    See Also:
    setFillColor(java.lang.String), setFillOpacity(float)
  - getEventOpaque
```
public boolean getEventOpaque()
```
    Should events inside this DrawItem be attributed to it regardless of which pixels are actually set, if no fill is specified? If set for DrawItems that aren't closed, will capture events occurring in the region that would filled if a fill were specified. This property is true by default for closed shapes, and false for paths, lines, etc.
    
    Returns:
    boolean
    See Also:
    getFillColor(), getFillOpacity()
  - setFillColor
```
public void setFillColor(java.lang.String fillColor)
```
    Fill color to use for shapes. The default of 'null' is transparent.
    
    If this method is called after the component has been drawn/initialized: Update fillColor for this drawItem.
    
    Parameters:
    fillColor - new fillColor to use. Pass null for transparent. See CSSColor . Default value is null
  - getFillColor
```
public java.lang.String getFillColor()
```
    Fill color to use for shapes. The default of 'null' is transparent.
    
    Returns:
    See CSSColor
  - setFillGradient
```
public void setFillGradient(Gradient fillGradient)
```
    Fill gradient to use for shapes. If a string it uses the gradient identifier parameter provided in DrawPane.addGradient(). Otherwise it expects one of SimpleGradient, LinearGradient or RadialGradient.
    
    If this method is called after the component has been drawn/initialized: Update fillGradient for this drawItem.
    
    Parameters:
    fillGradient - new gradient to use. Pass null for transparent.. Default value is null
    See Also:
    Gradient
  - getFillGradient
```
public Gradient getFillGradient()
```
    Fill gradient to use for shapes. If a string it uses the gradient identifier parameter provided in DrawPane.addGradient(). Otherwise it expects one of SimpleGradient, LinearGradient or RadialGradient.
    
    Returns:
    Gradient
    See Also:
    Gradient
  - setFillGradient
```
public void setFillGradient(java.lang.String fillGradient)
```
    Fill gradient to use for shapes. If a string it uses the gradient identifier parameter provided in DrawPane.addGradient(). Otherwise it expects one of SimpleGradient, LinearGradient or RadialGradient.
    
    If this method is called after the component has been drawn/initialized: Update fillGradient for this drawItem.
    
    Parameters:
    fillGradient - new gradient to use. Pass null for transparent.. Default value is null
    See Also:
    Gradient
  - getFillGradientAsString
```
public java.lang.String getFillGradientAsString()
```
    Fill gradient to use for shapes. If a string it uses the gradient identifier parameter provided in DrawPane.addGradient(). Otherwise it expects one of SimpleGradient, LinearGradient or RadialGradient.
    
    Returns:
    String
    See Also:
    Gradient
  - setFillOpacity
```
public void setFillOpacity(float fillOpacity)
```
    Opacity of the fillColor, as a number between 0 (transparent) and 1 (opaque).
    
    If this method is called after the component has been drawn/initialized: Update fillOpacity for this drawItem.
    
    Parameters:
    fillOpacity - new opacity, as a number between 0 (transparent) and 1 (opaque).. Default value is 1.0
  - getFillOpacity
```
public float getFillOpacity()
```
    Opacity of the fillColor, as a number between 0 (transparent) and 1 (opaque).
    
    Returns:
    float
  - setHoverDelay
```
public void setHoverDelay(int hoverDelay)
```
    If this.canHover is true, how long should the mouse be kept over this widget before the hover event is fired
    
    Parameters:
    hoverDelay - Default value is 300
    See Also:
    setCanHover(java.lang.Boolean), hover()
  - getHoverDelay
```
public int getHoverDelay()
```
    If this.canHover is true, how long should the mouse be kept over this widget before the hover event is fired
    
    Returns:
    int
    See Also:
    getCanHover(), hover()
  - setKeepInParentRect
```
public void setKeepInParentRect(java.lang.Boolean keepInParentRect)
```
    Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the draw pane or an arbitrary bounding box (if set to an array of the form [left, top, left + width, top + height]). When using a bounding box-type argument the left/top values can be negative, or the width/height values can be greater than the dimensions of the viewable area, to allow positioning or resizing the draw item beyond the confines of the draw pane.
    Note: keepInParentRect affects only user drag interactions, not programmatic moves or resizes.
    Note : This is an advanced setting
    
    Parameters:
    keepInParentRect - Default value is null
  - getKeepInParentRect
```
public java.lang.Boolean getKeepInParentRect()
```
    Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the draw pane or an arbitrary bounding box (if set to an array of the form [left, top, left + width, top + height]). When using a bounding box-type argument the left/top values can be negative, or the width/height values can be greater than the dimensions of the viewable area, to allow positioning or resizing the draw item beyond the confines of the draw pane.
    Note: keepInParentRect affects only user drag interactions, not programmatic moves or resizes.
    
    Returns:
    Boolean
  - setKeepInParentRect
```
public void setKeepInParentRect(float... keepInParentRect)
```
    Constrains drag-resizing and drag-repositioning of this draw item to either the current visible area of the draw pane or an arbitrary bounding box (if set to an array of the form [left, top, left + width, top + height]). When using a bounding box-type argument the left/top values can be negative, or the width/height values can be greater than the dimensions of the viewable area, to allow positioning or resizing the draw item beyond the confines of the draw pane.
    Note: keepInParentRect affects only user drag interactions, not programmatic moves or resizes.
    Note : This is an advanced setting
    
    Parameters:
    keepInParentRect - Default value is null
  - setKnobs
```
public void setKnobs(KnobType... knobs)
              throws java.lang.IllegalStateException
```
    Array of control knobs to display for this item. Each KnobType specified in this array will turn on UI element(s) allowing the user to manipulate this drawItem. To update the set of knobs at runtime use DrawItem.showKnobs() and DrawItem.hideKnobs().
    NOTE: Unless otherwise documented, DrawItem types only support KnobType.RESIZE and KnobType.MOVE knobs.
    
    Parameters:
    knobs - Default value is null
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
    See Also:
    Diagramming Example
  - getKnobs
```
public KnobType[] getKnobs()
```
    Array of control knobs to display for this item. Each KnobType specified in this array will turn on UI element(s) allowing the user to manipulate this drawItem. To update the set of knobs at runtime use DrawItem.showKnobs() and DrawItem.hideKnobs().
    NOTE: Unless otherwise documented, DrawItem types only support KnobType.RESIZE and KnobType.MOVE knobs.
    
    Returns:
    KnobType...
    See Also:
    Diagramming Example
  - setLineCap
```
public void setLineCap(LineCap lineCap)
```
    Style of drawing the endpoints of a line.
    Note that for dashed and dotted lines, the lineCap style affects each dash or dot.
    
    If this method is called after the component has been drawn/initialized: Update lineCap for this drawItem.
    
    Parameters:
    lineCap - new lineCap to use. Default value is "round"
  - getLineCap
```
public LineCap getLineCap()
```
    Style of drawing the endpoints of a line.
    Note that for dashed and dotted lines, the lineCap style affects each dash or dot.
    
    Returns:
    LineCap
  - setLineColor
```
public void setLineColor(java.lang.String lineColor)
```
    Line color
    
    If this method is called after the component has been drawn/initialized: Update lineColor for this drawItem.
    
    Parameters:
    lineColor - new line color. Pass null for transparent. See CSSColor . Default value is "#808080"
  - getLineColor
```
public java.lang.String getLineColor()
```
    Line color
    
    Returns:
    See CSSColor
  - setLineOpacity
```
public void setLineOpacity(float lineOpacity)
```
    Opacity for lines, as a number between 0 (transparent) and 1 (opaque).
    
    If this method is called after the component has been drawn/initialized: Update lineOpacity for this drawItem.
    
    Parameters:
    lineOpacity - new opacity, as a number between 0 (transparent) and 1 (opaque).. Default value is 1.0
  - getLineOpacity
```
public float getLineOpacity()
```
    Opacity for lines, as a number between 0 (transparent) and 1 (opaque).
    
    Returns:
    float
  - setLinePattern
```
public void setLinePattern(LinePattern linePattern)
```
    Pattern for lines, eg "solid" or "dash".
    Note that support in old browsers, such as Internet Explorer versions before IE11, is limited for drawingType "bitmap" to items with straight edges - DrawLines, DrawPaths, and DrawRects with no rounding.
    
    If this method is called after the component has been drawn/initialized: Update linePattern for this drawItem.
    
    Parameters:
    linePattern - new linePattern to use. Default value is "solid"
  - getLinePattern
```
public LinePattern getLinePattern()
```
    Pattern for lines, eg "solid" or "dash".
    Note that support in old browsers, such as Internet Explorer versions before IE11, is limited for drawingType "bitmap" to items with straight edges - DrawLines, DrawPaths, and DrawRects with no rounding.
    
    Returns:
    LinePattern
  - setLineWidth
```
public void setLineWidth(int lineWidth)
```
    Pixel width for lines.
    
    If this method is called after the component has been drawn/initialized: Update lineWidth for this drawItem.
    
    Parameters:
    lineWidth - new pixel lineWidth. Default value is 3
  - getLineWidth
```
public int getLineWidth()
```
    Pixel width for lines.
    
    Returns:
    int
  - getMoveKnob
```
public DrawKnob getMoveKnob()
                     throws java.lang.IllegalStateException
```
    If this item is showing KnobType.MOVE control knobs, this attribute specifies the AutoChild for the DrawKnob that allows a user to move the DrawItem with help of a knob located at moveKnobPoint. Default move knob shape is green circle.
    For an overview of how to use and configure AutoChildren, see Using AutoChildren.
    
    Returns:
    DrawKnob
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - setMoveKnobOffset
```
public void setMoveKnobOffset(int[] moveKnobOffset)
```
    If this item is showing a "move" control knob, this attribute allows you to specify an offset in pixels from the moveKnobPoint for the move knob. Offset should be specified as a 2-element array of [left offset, top offset].
    This offset overrides the built-in offset used when showing both resize and move knobs.
    
    If this method is called after the component has been drawn/initialized: Setter for moveKnobOffset.
    Note : This is an advanced setting
    
    Parameters:
    moveKnobOffset - the new move knob offset. This is a 2-element array of [left offset, top offset]. If null, then new int[] {0, 0} is assumed.. Default value is null
    See Also:
    setMoveKnobPoint(com.smartgwt.client.types.MoveKnobPoint)
  - getMoveKnobOffset
```
public int[] getMoveKnobOffset()
```
    If this item is showing a "move" control knob, this attribute allows you to specify an offset in pixels from the moveKnobPoint for the move knob. Offset should be specified as a 2-element array of [left offset, top offset].
    This offset overrides the built-in offset used when showing both resize and move knobs.
    
    Returns:
    int[]
    See Also:
    getMoveKnobPoint()
  - setMoveKnobPoint
```
public void setMoveKnobPoint(MoveKnobPoint moveKnobPoint)
                      throws java.lang.IllegalStateException
```
    If this item is showing a KnobType.MOVE control knob, this attribute specifies where the knob should appear with respect to the draw item.
    The resize and move knobs show at the same position by default. However, when both knobs are shown the move knob is offset slightly to allow access to both. This position can be adjusted manually with moveKnobOffset.
    
    Parameters:
    moveKnobPoint - Default value is "TL"
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
    See Also:
    setMoveKnobOffset(int[])
  - getMoveKnobPoint
```
public MoveKnobPoint getMoveKnobPoint()
```
    If this item is showing a KnobType.MOVE control knob, this attribute specifies where the knob should appear with respect to the draw item.
    The resize and move knobs show at the same position by default. However, when both knobs are shown the move knob is offset slightly to allow access to both. This position can be adjusted manually with moveKnobOffset.
    
    Returns:
    MoveKnobPoint
    See Also:
    getMoveKnobOffset()
  - setPrompt
```
public void setPrompt(java.lang.String prompt)
```
    Default hover HTML that is displayed in the global hover canvas if the user hovers over this DrawItem and showHover is true.
    
    Parameters:
    prompt - See HTMLString . Default value is null
  - getPrompt
```
public java.lang.String getPrompt()
```
    Default hover HTML that is displayed in the global hover canvas if the user hovers over this DrawItem and showHover is true.
    
    Returns:
    See HTMLString
  - setProportionalResizing
```
public void setProportionalResizing(ProportionalResizeMode proportionalResizing)
                             throws java.lang.IllegalStateException
```
    This property specifies the conditions for when proportional resizing is used.
    By default the DrawItem is forced to only resize proportionally while any modifier key specified in proportionalResizeModifiers is pressed. For example, the DrawItem will change its width and height by the same percentage as long as the "Shift" key is held down.
    Note that this property only has an effect if the DrawItem is showing KnobType.RESIZE control knobs.
    
    Parameters:
    proportionalResizing - Default value is "modifier"
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getProportionalResizing
```
public ProportionalResizeMode getProportionalResizing()
```
    This property specifies the conditions for when proportional resizing is used.
    By default the DrawItem is forced to only resize proportionally while any modifier key specified in proportionalResizeModifiers is pressed. For example, the DrawItem will change its width and height by the same percentage as long as the "Shift" key is held down.
    Note that this property only has an effect if the DrawItem is showing KnobType.RESIZE control knobs.
    
    Returns:
    ProportionalResizeMode
  - setResizeKnobPoints
```
public void setResizeKnobPoints(ResizeKnobPoint... resizeKnobPoints)
                         throws java.lang.IllegalStateException
```
    If this item is showing KnobType.RESIZE control knobs, this attribute specifies the points with respect to the draw item where resize knobs should appear.
    
    Parameters:
    resizeKnobPoints - Default value is ["TL","TR","BL","BR","T","R","B","L"]
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getResizeKnobPoints
```
public ResizeKnobPoint[] getResizeKnobPoints()
```
    If this item is showing KnobType.RESIZE control knobs, this attribute specifies the points with respect to the draw item where resize knobs should appear.
    
    Returns:
    ResizeKnobPoint...
  - getResizeOutline
```
public DrawRect getResizeOutline()
                          throws java.lang.IllegalStateException
```
    If this item is showing KnobType.RESIZE control knobs, this attribute specifies the AutoChild for the DrawRect that draws a rectangle frame which connects all resize knobs of current DrawItem.
    For an overview of how to use and configure AutoChildren, see Using AutoChildren.
    
    Returns:
    DrawRect
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - setResizeViaLocalTransformOnly
```
public void setResizeViaLocalTransformOnly(boolean resizeViaLocalTransformOnly)
                                    throws java.lang.IllegalStateException
```
    If this DrawItem is showing KnobType.RESIZE control knobs, should resizing the shape solely update the local transform (for example, the DrawItem's scale or translation)?.
    The default is false, which means that the DrawItem is allowed to modify its shape properties in order to fit within a given width and height. Some examples:
    - A DrawOval might decrease its radius when resized to a smaller size.
    - A DrawPath might change its points to lengthen all line segments in the path by some proportion so that it fits into a larger size.
    This approach allows a DrawItem to maintain the same line width even as it is being resized.
    If this property is set to true then all visual aspects of the DrawItem, including the line width and the fill, will be magnified or reduced during resizes as if the DrawItem were placed under a lens.
    Parameters:
    resizeViaLocalTransformOnly - Default value is false
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getResizeViaLocalTransformOnly
```
public boolean getResizeViaLocalTransformOnly()
```
    If this DrawItem is showing KnobType.RESIZE control knobs, should resizing the shape solely update the local transform (for example, the DrawItem's scale or translation)?.
    The default is false, which means that the DrawItem is allowed to modify its shape properties in order to fit within a given width and height. Some examples:
    - A DrawOval might decrease its radius when resized to a smaller size.
    - A DrawPath might change its points to lengthen all line segments in the path by some proportion so that it fits into a larger size.
    This approach allows a DrawItem to maintain the same line width even as it is being resized.
    If this property is set to true then all visual aspects of the DrawItem, including the line width and the fill, will be magnified or reduced during resizes as if the DrawItem were placed under a lens.
    Returns:
    boolean
  - setRotation
```
public void setRotation(float rotation)
                 throws java.lang.IllegalStateException
```
    Deprecated. GwtFloatVsDouble
    
    Rotation in degrees about the center point. The positive direction is clockwise.
    
    Parameters:
    rotation - Default value is 0.0
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getRotation
```
public float getRotation()
```
    Deprecated. GwtFloatVsDouble
    
    Rotation in degrees about the center point. The positive direction is clockwise.
    
    Returns:
    float
  - setRotation
```
public void setRotation(double rotation)
                 throws java.lang.IllegalStateException
```
    Rotation in degrees about the center point. The positive direction is clockwise.
    
    Parameters:
    rotation - Default value is 0.0
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getRotationAsDouble
```
public double getRotationAsDouble()
```
    Rotation in degrees about the center point. The positive direction is clockwise.
    
    Returns:
    double
  - setScale
```
public void setScale(int[] scale)
              throws java.lang.IllegalStateException
```
    Array holds 2 values representing scaling along x and y dimensions.
    Note : This is an advanced setting
    
    Parameters:
    scale - Default value is null
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getScale
```
public int[] getScale()
```
    Array holds 2 values representing scaling along x and y dimensions.
    
    Returns:
    int[]
  - setShadow
```
public void setShadow(Shadow shadow)
```
    Shadow used for all DrawItem subtypes.
    
    If this method is called after the component has been drawn/initialized: Update shadow for this drawItem.
    
    Parameters:
    shadow - new shadow. Default value is null
  - getShadow
```
public Shadow getShadow()
```
    Shadow used for all DrawItem subtypes.
    
    Returns:
    Shadow
  - setShowHover
```
public void setShowHover(boolean showHover)
```
    If canHover is true, should we show the global hover canvas by default when the user hovers over this DrawItem?
    
    Parameters:
    showHover - Default value is true
    See Also:
    getHoverHTML()
  - getShowHover
```
public boolean getShowHover()
```
    If canHover is true, should we show the global hover canvas by default when the user hovers over this DrawItem?
    
    Returns:
    boolean
    See Also:
    getHoverHTML()
  - setShowResizeOutline
```
public void setShowResizeOutline(boolean showResizeOutline)
```
    If this item is showing KnobType.RESIZE control knobs will the resize outline be shown or not.
    
    Parameters:
    showResizeOutline - Default value is true
    See Also:
    com.smartgwt.client.widgets.drawing.DrawItem#setResizeOutline
  - getShowResizeOutline
```
public boolean getShowResizeOutline()
```
    If this item is showing KnobType.RESIZE control knobs will the resize outline be shown or not.
    
    Returns:
    boolean
    See Also:
    getResizeOutline()
  - getSideResizeKnob
```
public DrawKnob getSideResizeKnob()
```
    Note : This API is non-functional (always returns null) and exists only to make you aware that this MultiAutoChild exists. See Using AutoChildren for details.
    If this item is showing KnobType.RESIZE control knobs, this attribute specifies the MultiAutoChild for the DrawKnob that allows a user to resize the DrawItem with help of knobs located at centers of edges of a bounding rectangle of current DrawItem. Default shape is red square.
    
    Returns:
    null
  - setStartArrow
```
public void setStartArrow(ArrowStyle startArrow)
```
    Style of arrowhead to draw at the beginning of the line or path.
    
    If this method is called after the component has been drawn/initialized: Set the arrowhead at the beginning of this path.
    NOTE: Not all DrawItem classes support arrowheads. You can use DrawItem.supportsStartArrow() to dynamically check whether a DrawItem instance supports this method.
    
    Parameters:
    startArrow - style of arrow to use. Default value is null
  - getStartArrow
```
public ArrowStyle getStartArrow()
```
    Style of arrowhead to draw at the beginning of the line or path.
    
    Returns:
    ArrowStyle
  - getStartKnob
```
public DrawKnob getStartKnob()
                      throws java.lang.IllegalStateException
```
    If this item is showing KnobType.STARTPOINT control knobs, this attribute specifies the AutoChild for the DrawKnob for start point of current drawItem.
    For an overview of how to use and configure AutoChildren, see Using AutoChildren.
    
    Returns:
    DrawKnob
    
    Throws:
    
    java.lang.IllegalStateException - if the underlying component has not yet been created.
  - setTranslate
```
public void setTranslate(int[] translate)
                  throws java.lang.IllegalStateException
```
    Array holds two values representing translation along the x and y dimensions.
    Note : This is an advanced setting
    
    Parameters:
    translate - Default value is null
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getTranslate
```
public int[] getTranslate()
```
    Array holds two values representing translation along the x and y dimensions.
    
    Returns:
    int[]
  - setXShearFactor
```
public void setXShearFactor(double xShearFactor)
                     throws java.lang.IllegalStateException
```
    The slope of an x-shearing transformation applied to this DrawItem. Each point in the shape is moved along the x-axis a distance that is proportional to the initial y-coordinate of the point.
    Note : This is an advanced setting
    
    Parameters:
    xShearFactor - Default value is 0.0
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getXShearFactor
```
public double getXShearFactor()
```
    The slope of an x-shearing transformation applied to this DrawItem. Each point in the shape is moved along the x-axis a distance that is proportional to the initial y-coordinate of the point.
    
    Returns:
    double
  - setYShearFactor
```
public void setYShearFactor(double yShearFactor)
                     throws java.lang.IllegalStateException
```
    The slope of a y-shearing transformation applied to this DrawItem. Each point in the shape is moved along the y-axis a distance that is proportional to the initial x-coordinate of the point.
    Note : This is an advanced setting
    
    Parameters:
    yShearFactor - Default value is 0.0
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getYShearFactor
```
public double getYShearFactor()
```
    The slope of a y-shearing transformation applied to this DrawItem. Each point in the shape is moved along the y-axis a distance that is proportional to the initial x-coordinate of the point.
    
    Returns:
    double
  - addClickHandler
```
public HandlerRegistration addClickHandler(ClickHandler handler)
```
    Add a click handler.
    Notification fired when the user clicks on this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addClickHandler in interface HasClickHandlers
    
    Parameters:
    handler - the click handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - dragResizeMove
```
public void dragResizeMove(java.lang.String position,
                  java.lang.Integer x,
                  java.lang.Integer y,
                  java.lang.Integer dX,
                  java.lang.Integer dY)
```
    If canDrag is true and the control knobs include "resize" knobs, then this notification method will be fired when the user drag-resizes the draw item.
    
    Parameters:
    position - provides which knob of the resizeKnobPoints was dragged
    x - new x-coordinate of the knob
    y - new y-coordinate of the knob
    dX - horizontal distance moved
    dY - vertical distance moved
  - draw
```
public void draw()
```
    Draw this item into its current DrawPane.
  - erase
```
public void erase()
```
    Erase this drawItem's visual representation and remove it from its DrawGroup (if any) and DrawPane.
    To re-draw the item within the DrawPane, call DrawItem.draw() again, or use DrawPane.addDrawItem() to move to another DrawGroup.
  - getCenter
```
public Point getCenter()
```
    Returns the center point of the bounding box.
    
    Returns:
    the center point
  - getHoverHTML
```
public java.lang.String getHoverHTML()
```
    If showHover is true, when the user holds the mouse over this DrawItem for long enough to trigger a hover event, a hover canvas is shown by default. This method returns the contents of that hover canvas. Default implementation returns prompt - override for custom hover HTML. Note that returning null or an empty string will suppress the hover canvas altogether.
    
    Returns:
    the HTML to show in the hover
  - getPageLeft
```
public int getPageLeft()
```
    Returns the page-relative left coordinate of the widget on the page, in pixels.
    
    Returns:
    global left coordinate
    See Also:
    Positioning overview and related methods
  - getPageTop
```
public int getPageTop()
```
    Returns the page-relative top coordinate of the widget on the page, in pixels
    
    Returns:
    GLOBAL top coordinate
    See Also:
    Positioning overview and related methods
  - getSvgString
```
public void getSvgString()
```
    Generates a string containing the SVG source of this DrawItem.
    NOTE: The generated SVG source assumes that the default namespace is http://www.w3.org/2000/svg and that namespace prefix xlink refers to namespace name http://www.w3.org/1999/xlink.
  - hide
```
public void hide()
```
    Hide this drawItem.
  - hideAllKnobs
```
public void hideAllKnobs()
```
    Hides all control knobs for this drawItem. Updates knobs to remove all knobTypes and clears any drawn knobs.
  - hideKnobs
```
public void hideKnobs(KnobType knobType)
```
    Hides a set of control knobs for this drawItem. Updates knobs to remove the specified knobType, and clears any drawn knobs for this knobType.
    
    Parameters:
    knobType - knobs to hide
  - hideKnobs
```
public void hideKnobs(KnobType... knobType)
```
    Hides a set of control knobs for this drawItem. Updates knobs to remove the specified knobType, and clears any drawn knobs for this knobType.
    
    Parameters:
    knobType - knobs to hide
  - hover
```
public boolean hover()
```
    If canHover is true for this DrawItem, the hover() string method will be fired when the user hovers over this DrawItem. If this method returns false, it will suppress the default behavior of showing a hover canvas if showHover is true.
    
    Returns:
    false to cancel the hover event.
  - isInBounds
```
public boolean isInBounds(int x,
                 int y)
```
    Returns true if the given point in the drawing coordinate system, when converted to coordinates in this DrawItem's local coordinate system, is within the bounding box of this DrawItem's shape.
    This method can be used to quickly check whether the given point is definitely not within the DrawItem shape. To check whether the point is within the DrawItem shape, use the slower but exact DrawItem.isPointInPath() method.
    
    Parameters:
    x - X coordinate of the point in the drawing coordinate system.
    y - Y coordinate of the point in the drawing coordinate system.
    
    Returns:
  - isPointInPath
```
public boolean isPointInPath(int x,
                    int y)
```
    Returns true if the given point in the drawing coordinate system is within this DrawItem's shape, taking into account local transforms.
    
    Parameters:
    x - X coordinate of the test point.
    y - Y coordinate of the test point.
    
    Returns:
  - addMouseDownHandler
```
public HandlerRegistration addMouseDownHandler(MouseDownHandler handler)
```
    Add a mouseDown handler.
    Notification fired when the user presses the left mouse button on this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addMouseDownHandler in interface HasMouseDownHandlers
    
    Parameters:
    handler - the mouseDown handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addMouseMoveHandler
```
public HandlerRegistration addMouseMoveHandler(MouseMoveHandler handler)
```
    Add a mouseMove handler.
    Notification fired when the user moves the mouse over this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addMouseMoveHandler in interface HasMouseMoveHandlers
    
    Parameters:
    handler - the mouseMove handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addMouseOutHandler
```
public HandlerRegistration addMouseOutHandler(MouseOutHandler handler)
```
    Add a mouseOut handler.
    Notification fired when the mouse leaves this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addMouseOutHandler in interface HasMouseOutHandlers
    
    Parameters:
    handler - the mouseOut handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addMouseOverHandler
```
public HandlerRegistration addMouseOverHandler(MouseOverHandler handler)
```
    Add a mouseOver handler.
    Notification fired when the mouse enters this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addMouseOverHandler in interface HasMouseOverHandlers
    
    Parameters:
    handler - the mouseOver handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addMouseUpHandler
```
public HandlerRegistration addMouseUpHandler(MouseUpHandler handler)
```
    Add a mouseUp handler.
    Notification fired when the user releases the left mouse button on this DrawItem.
    Note that if this item is part of a DrawGroup, then the group's useGroupRect setting affects whether this item receives the notification. If useGroupRect is true, then this item will not receive the notification. Otherwise, the item receives the notification and notification bubbles up to the group.
    
    Specified by:
    
    addMouseUpHandler in interface HasMouseUpHandlers
    
    Parameters:
    handler - the mouseUp handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - moveBy
```
public void moveBy(int dX,
          int dY)
```
    Move the shape by the specified deltas for the left and top coordinate.
    
    Parameters:
    dX - change to left coordinate in pixels
    dY - change to top coordinate in pixels
  - addMovedHandler
```
public HandlerRegistration addMovedHandler(MovedHandler handler)
```
    Add a moved handler.
    Notification method fired when this component is explicitly moved. Note that a component's position on the screen may also be changed due to an ancestor being moved. The parentMoved() method provides a notification entry point to catch that case as well.
    
    Specified by:
    
    addMovedHandler in interface HasMovedHandlers
    
    Parameters:
    handler - the moved handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - moveTo
```
public void moveTo(java.lang.Integer left,
          java.lang.Integer top)
```
    Move the DrawItem to the specified coordinates in the global coordinate system. The specified coordinates will become the top-left point of the resize bounding box.
    
    Parameters:
    left - new left coordinate in pixels
    top - new top coordinate in pixels
  - addDragMoveHandler
```
public HandlerRegistration addDragMoveHandler(DragMoveHandler handler)
```
    Add a dragMove handler.
    If canDrag is true, this notification method will be fired when the user drags the draw item.
    
    Specified by:
    
    addDragMoveHandler in interface HasDragMoveHandlers
    
    Parameters:
    handler - the dragMove handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addDragResizeMoveHandler
```
public HandlerRegistration addDragResizeMoveHandler(DragResizeMoveHandler handler)
```
    Add a dragResizeMove handler.
    If canDrag is true and the control knobs include "resize" knobs then this notification method will be fired when the user drags the resize knobs of the draw item.
    
    Specified by:
    
    addDragResizeMoveHandler in interface HasDragResizeMoveHandlers
    
    Parameters:
    handler - the dragResizeMove handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addDragResizeStartHandler
```
public HandlerRegistration addDragResizeStartHandler(DragResizeStartHandler handler)
```
    Add a dragResizeStart handler.
    If canDrag is true and the control knobs include "resize" knobs then this notification method will be fired when the user starts to drag the resize knobs of the draw item.
    
    Specified by:
    
    addDragResizeStartHandler in interface HasDragResizeStartHandlers
    
    Parameters:
    handler - the dragResizeStart handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addDragResizeStopHandler
```
public HandlerRegistration addDragResizeStopHandler(DragResizeStopHandler handler)
```
    Add a dragResizeStop handler.
    If canDrag is true and the control knobs include "resize" knobs then this notification method will be fired when the user completes a drag on the resize knobs of the draw item.
    
    Specified by:
    
    addDragResizeStopHandler in interface HasDragResizeStopHandlers
    
    Parameters:
    handler - the dragResizeStop handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addDragStartHandler
```
public HandlerRegistration addDragStartHandler(DragStartHandler handler)
```
    Add a dragStart handler.
    If canDrag is true, this notification method will be fired when the user starts to drag the draw item.
    
    Specified by:
    
    addDragStartHandler in interface HasDragStartHandlers
    
    Parameters:
    handler - the dragStart handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - addDragStopHandler
```
public HandlerRegistration addDragStopHandler(DragStopHandler handler)
```
    Add a dragStop handler.
    If canDrag is true, this notification method will be fired when the user completes a drag on the draw item.
    
    Specified by:
    
    addDragStopHandler in interface HasDragStopHandlers
    
    Parameters:
    handler - the dragStop handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - resizeBy
```
public void resizeBy(int dX,
            int dY)
```
    Resize the shape by the specified deltas.
    
    Parameters:
    dX - number of pixels to resize by horizontally
    dY - number of pixels to resize by vertically
  - addResizedHandler
```
public HandlerRegistration addResizedHandler(ResizedHandler handler)
```
    Add a resized handler.
    Observable method called whenever a DrawItem changes size.
    
    Specified by:
    
    addResizedHandler in interface HasResizedHandlers
    
    Parameters:
    handler - the resized handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - resizeTo
```
public void resizeTo(java.lang.Integer width,
            java.lang.Integer height)
```
    Resize to the specified size
    
    Parameters:
    width - new width
    height - new height
  - rotateBy
```
public void rotateBy(double degrees)
```
    Rotate the shape by the relative rotation in degrees
    
    Parameters:
    degrees - number of degrees to rotate from current orientation.
  - rotateTo
```
public void rotateTo(double degrees)
```
    Rotate the shape by the absolute rotation in degrees
    
    Parameters:
    degrees - number of degrees to rotate
  - scaleBy
```
public void scaleBy(double x,
           double y)
```
    Scale the shape by the x, y multipliers
    
    Parameters:
    x - scale in the x direction
    y - scale in the y direction
  - scaleTo
```
public void scaleTo(double x,
           double y)
```
    Scale the shape by the x, y multipliers
    
    Parameters:
    x - scale in the x direction
    y - scale in the y direction
  - setCenterPoint
```
public void setCenterPoint(int left,
                  int top)
```
    Change the center point for this DrawItem.
    
    Parameters:
    left - X coordinate of the center point (in the global coordinate system).
    top - Y coordinate of the center point (in the global coordinate system).
  - setPropertyValue
```
public void setPropertyValue(java.lang.String propertyName,
                    java.lang.Object newValue)
```
    Sets a property on this DrawItem, calling the appropriate setter method if one is found and is supported.
    
    Parameters:
    propertyName - name of the property to set
    newValue - new value for the property
  - show
```
public void show()
```
    Make this drawItem visible.
  - showAllKnobs
```
public void showAllKnobs()
```
    Shows all supported control knobs for this drawItem. Updates knobs to include the supported knobTypes and if necessary draws out the appropriate control knobs.
  - addShowContextMenuHandler
```
public HandlerRegistration addShowContextMenuHandler(ShowContextMenuHandler handler)
```
    Add a showContextMenu handler.
    Executed when the right mouse button is clicked. The default implementation of this method auto-creates a Menu from the contextMenu property on this component and then calls Menu.showContextMenu() on it to show it.
    If you want to show a standard context menu, you can simply define your Menu and set it as the contextMenu property on your component - you do not need to override this method.
    If you want to do some other processing before showing a menu or do something else entirely, then you should override this method. Note that the return value from this method controls whether or not the native browser context menu is shown.
    
    Specified by:
    
    addShowContextMenuHandler in interface HasShowContextMenuHandlers
    
    Parameters:
    handler - the showContextMenu handler
    
    Returns:
    HandlerRegistration used to remove this handler
  - showKnobs
```
public void showKnobs(KnobType knobType)
```
    Shows a set of control knobs for this drawItem. Updates knobs to include the specified knobType, and if necessary draws out the appropriate control knobs.
    
    Parameters:
    knobType - knobs to show
  - showKnobs
```
public void showKnobs(KnobType... knobType)
```
    Shows a set of control knobs for this drawItem. Updates knobs to include the specified knobType, and if necessary draws out the appropriate control knobs.
    
    Parameters:
    knobType - knobs to show
  - supportsEndArrow
```
public boolean supportsEndArrow()
```
    Does this DrawItem support DrawItem.setEndArrow()? For example, this is false for DrawRect and DrawOval, and true for DrawLine.
    
    Returns:
    whether setEndArrow() is supported by this DrawItem.
  - supportsStartArrow
```
public boolean supportsStartArrow()
```
    Does this DrawItem support DrawItem.setStartArrow()? For example, this is false for DrawRect and DrawOval, and true for DrawLine.
    
    Returns:
    whether setStartArrow() is supported by this DrawItem.
  - setDefaultProperties
```
public static void setDefaultProperties(DrawItem drawItemProperties)
```
    Class level method to set the default properties of this class. If set, then all existing and subsequently created instances of this class will automatically have default properties corresponding to the properties set on the SmartGWT class instance passed to this function before its underlying SmartClient JS object was created. This is a powerful feature that eliminates the need for users to create a separate hierarchy of subclasses that only alter the default properties of this class. Can also be used for skinning / styling purposes.
    Note: This method is intended for setting default attributes only and will affect all instances of the underlying class (including those automatically generated in JavaScript). This method should not be used to apply standard EventHandlers or override methods for a class - use a custom subclass instead. Calling this method after instances have been created can result in undefined behavior, since it bypasses any setters and a class instance may have already examined a particular property and not be expecting any changes through this route.
    
    Parameters:
    drawItemProperties - properties that should be used as new defaults when instances of this class are created
  - getRef
```
public static DrawItem getRef(JavaScriptObject jsObj)
```
  - computeAngle
```
public static float computeAngle(double px1,
                 double py1,
                 double px2,
                 double py2)
```
    Deprecated. GwtFloatVsDouble
    
    Computes the angle in degrees from the positive X axis to the difference vector v₂ - v₁ between the two given vectors.
    
    Parameters:
    px1 - X coordinate of v₁
    py1 - Y coordinate of v₁
    px2 - X coordinate of v₂
    py2 - Y coordinate of v₂
    
    Returns:
    the angle in degrees, in the range [0, 360).
  - computeAngleAsDouble
```
public static double computeAngleAsDouble(double px1,
                          double py1,
                          double px2,
                          double py2)
```
    Computes the angle in degrees from the positive X axis to the difference vector v₂ - v₁ between the two given vectors.
    
    Parameters:
    px1 - X coordinate of v₁
    py1 - Y coordinate of v₁
    px2 - X coordinate of v₂
    py2 - Y coordinate of v₂
    
    Returns:
    the angle in degrees, in the range [0, 360).
  - getBoundingBoxAsDouble
```
public java.lang.Double[] getBoundingBoxAsDouble()
```
    Returns the startPoint endPoint
    
    Returns:
    x1, y1, x2, y2 coordinates
  - getBoundingBox
```
public int[] getBoundingBox()
```
    Returns the startPoint endPoint
    
    Returns:
    x1, y1, x2, y2 coordinates
  - getResizeBoundingBoxAsDouble
```
public java.lang.Double[] getResizeBoundingBoxAsDouble()
```
    Returns the bounding box of the shape reflected by the resize outline shown when dragging the resize knobs. This method is similar to getBoundingBoxAsDouble except that the coordinates returned by this method are in the global coordinate system (described here).
    
    Returns:
    The x1, y1, x2, y2 coordinates. When the width and height are both positive, point (x1, y1) is the top-left point of the bounding box and point (x2, y2) is the bottom-right point of the bounding box.
    See Also:
    getBoundingBoxAsDouble()
  - getResizeBoundingBox
```
public int[] getResizeBoundingBox()
```
    Returns the bounding box of the shape reflected by the resize outline shown when dragging the resize knobs. This method is similar to getBoundingBox except that the coordinates returned by this method are in the global coordinate system (described here).
    
    Returns:
    The x1, y1, x2, y2 coordinates. When the width and height are both positive, point (x1, y1) is the top-left point of the bounding box and point (x2, y2) is the bottom-right point of the bounding box.
    See Also:
    getBoundingBox()
  - getAttributeAsIntArray
```
protected int[] getAttributeAsIntArray(java.lang.String property)
```
  - setAttribute
```
protected void setAttribute(java.lang.String attribute,
                java.lang.Float[] value,
                boolean allowPostCreate)
```
    Overrides:
    
    setAttribute in class BaseClass
  - setAttribute
```
protected void setAttribute(java.lang.String attribute,
                float[] value,
                boolean allowPostCreate)
```
    Overrides:
    
    setAttribute in class BaseClass
  - setAutoChildConstructor
```
public void setAutoChildConstructor(java.lang.String autoChildName,
                           java.lang.String className)
```
    Sets the SmartClient constructor for the AutoChild named autoChildName.
    
    Parameters:
    autoChildName - the name of the AutoChild
    className - the SmartClient class name to use when constructing the AutoChild.
    See Also:
    AutoChildUsage
  - setAutoChildProperties
```
public void setAutoChildProperties(java.lang.String autoChildName,
                          Canvas properties)
                            throws java.lang.IllegalStateException
```
    Sets the properties for creating a Canvas AutoChild named autoChildName.
    properties must not have already been created (properties.isCreated() must be false).
    NOTE: Overrides at override points are not applied to AutoChildren created from properties; that is, if the Java Class of properties overrides a Smart GWT override point, the custom method implementation will not be called.
    
    Throws:
    
    java.lang.IllegalStateException - if properties has been created.
    See Also:
    AutoChildUsage
  - setAutoChildProperties
```
public void setAutoChildProperties(java.lang.String autoChildName,
                          FormItem properties)
                            throws java.lang.IllegalStateException
```
    Sets the properties for creating a FormItem AutoChild named autoChildName.
    properties must not have already been created (properties.isCreated() must be false).
    NOTE: Overrides at override points are not applied to AutoChildren created from properties; that is, if the Java Class of properties overrides a Smart GWT override point, the custom method implementation will not be called.
    
    Throws:
    
    java.lang.IllegalStateException - if properties has been created.
    See Also:
    AutoChildUsage
  - setAutoChildProperties
```
public void setAutoChildProperties(java.lang.String autoChildName,
                          DrawItem properties)
                            throws java.lang.IllegalStateException
```
    Sets the properties for creating a DrawItem AutoChild named autoChildName.
    properties must not have already been created (properties.isCreated() must be false).
    NOTE: Overrides at override points are not applied to AutoChildren created from properties; that is, if the Java Class of properties overrides a Smart GWT override point, the custom method implementation will not be called.
    
    Throws:
    
    java.lang.IllegalStateException - if properties has been created.
    See Also:
    AutoChildUsage
  - setAutoChildProperties
```
public void setAutoChildProperties(java.lang.String autoChildName,
                          EditProxy properties)
                            throws java.lang.IllegalStateException
```
    Sets the properties for creating an AutoChild named autoChildName.
    properties must not have already been created (properties.isCreated() must be false).
    
    Throws:
    
    java.lang.IllegalStateException - if properties has been created.
    See Also:
    AutoChildUsage
  - setAutoChildVisibility
```
public void setAutoChildVisibility(java.lang.String autoChildName,
                          boolean visible)
```
    Sets whether to create and show the AutoChild named autoChildName.
    NOTE: This API is not valid for all AutoChildren because some AutoChildren cannot be hidden without destroying the main functions of the component.
    
    Parameters:
    autoChildName - name of an AutoChild
    visible - whether to show the AutoChild
  - getCanvasAutoChild
```
public final Canvas getCanvasAutoChild(java.lang.String autoChildName)
```
    Returns the Canvas AutoChild named autoChildName if already created.
    
    Parameters:
    autoChildName - name of an AutoChild to return.
    
    Throws:
    
    java.lang.RuntimeException - if the AutoChild is not a SmartClient Canvas object.
  - getFormItemAutoChild
```
public final FormItem getFormItemAutoChild(java.lang.String autoChildName)
```
    Returns the FormItem AutoChild named autoChildName if already created.
    
    Parameters:
    autoChildName - name of an AutoChild to return.
    
    Throws:
    
    java.lang.RuntimeException - if the AutoChild is not a SmartClient FormItem object.
  - getDrawItemAutoChild
```
public final DrawItem getDrawItemAutoChild(java.lang.String autoChildName)
```
    Returns the DrawItem AutoChild named autoChildName if already created.
    
    Parameters:
    autoChildName - name of an AutoChild to return.
    
    Throws:
    
    java.lang.RuntimeException - if the AutoChild is not a SmartClient DrawItem object.
  - setProportionalResizeModifiers
```
public void setProportionalResizeModifiers(java.lang.String... proportionalResizeModifiers)
                                    throws java.lang.IllegalStateException
```
    If proportionalResizing is set to ProportionalResizeMode.MODIFIER or ProportionalResizeMode.MODIFIER_OFF then proportional resizing of the DrawItem is activated or deactivated, respectively, whenever at least one key in this set of modifier keys is pressed.
    The keys allowed in this set are: "Alt", "Ctrl", and "Shift". If this set of keys is empty then proportional resizing is always used if proportionalResizing is MODIFIER and is never used if proportionalResizing is MODIFIER_OFF.
    
    Parameters:
    proportionalResizeModifiers - Default value is ["Shift"]
    
    Throws:
    
    java.lang.IllegalStateException - this property cannot be changed after the underlying component has been created
  - getProportionalResizeModifiers
```
public java.lang.String[] getProportionalResizeModifiers()
```
    If proportionalResizing is set to ProportionalResizeMode.MODIFIER or ProportionalResizeMode.MODIFIER_OFF then proportional resizing of the DrawItem is activated or deactivated, respectively, whenever at least one key in this set of modifier keys is pressed.
    The keys allowed in this set are: "Alt", "Ctrl", and "Shift". If this set of keys is empty then proportional resizing is always used if proportionalResizing is MODIFIER and is never used if proportionalResizing is MODIFIER_OFF.
    
    Returns:
    String...

Class DrawItem

Field Summary

Fields inherited from class com.smartgwt.client.core.BaseClass

Constructor Summary

Method Summary

Methods inherited from class com.smartgwt.client.core.BaseClass

Methods inherited from class java.lang.Object

Methods inherited from interface com.google.gwt.event.shared.HasHandlers

Constructor Detail

DrawItem

DrawItem

Method Detail

getOrCreateRef

changeAutoChildDefaults

changeAutoChildDefaults

changeAutoChildDefaults

create

setCanDrag

getCanDrag

setCanHover

getCanHover

setContextMenu

getContextMenu

getCornerResizeKnob

setCursor

getCursor

getDestroyed

getDestroying

setDragStartDistance

getDragStartDistance

setDrawGroup

getDrawGroup

setDrawPane

getDrawPane

setEditProxyConstructor

getEditProxyConstructor

setEndArrow

getEndArrow

getEndKnob

setEventOpaque

getEventOpaque

setFillColor

getFillColor

setFillGradient

getFillGradient

setFillGradient

getFillGradientAsString

setFillOpacity

getFillOpacity

setHoverDelay

getHoverDelay

setKeepInParentRect

getKeepInParentRect

setKeepInParentRect

setKnobs

getKnobs

setLineCap

getLineCap

setLineColor

getLineColor

setLineOpacity

getLineOpacity

setLinePattern

getLinePattern

setLineWidth

getLineWidth

getMoveKnob

setMoveKnobOffset

getMoveKnobOffset

setMoveKnobPoint

getMoveKnobPoint

setPrompt

getPrompt

setProportionalResizing

getProportionalResizing

setResizeKnobPoints

getResizeKnobPoints

getResizeOutline

setResizeViaLocalTransformOnly

getResizeViaLocalTransformOnly